THE DATA REDUCTION USING MATLAB FOR DIFFERENT SPECKLE IMAGES FORM SMALL SURFACES ROUGHNESS
- Demonstrator at Fcis, Ain Shams University, Cairo, Egypt.
- Professor Doctor at Faculty of Science, Ain Shams University, Cairo, Egypt.
- Professor Doctor at Fcis, Ain Shams University, Cairo, Egypt.
- Abstract
- Keywords
- Cite This Article as
- Corresponding Author
The so-called laser speckles are bright spots and dark spots formed when a coherent ray is incident on a rough surface which scattered randomly in all directions, the interference of these scattered rays form these bright and dark spots (Laser Speckles).In this paper we are concerned with the formation of Objective speckles calculations. Using MATLAB the image can be converted into binary object (0 and 1) as the speckle spots intensities are dark and bright, respectively.To simplify the calculations, two processes (transform and predictive) may be used, and according to the loss of many data for the using of predictive process, the transform process is considered.The calculations are based on the evaluation on small roughness of surfaces in range 0.1 – 1 μm, on the same footing the contrast was considered in the range from zero to one.Fraunhofer diffraction Unfortunately, no calculations in this field had been done from other researchers.
[M. Karamanii, H-Elghandoor and H. Ramadan (2021); THE DATA REDUCTION USING MATLAB FOR DIFFERENT SPECKLE IMAGES FORM SMALL SURFACES ROUGHNESS Int. J. of Adv. Res. 9 (Apr). 563-572] (ISSN 2320-5407). www.journalijar.com
demonstrator at Fcis, Ain Shams university, Cairo, Egypt
