30Sep 2017

A STUDY ABOUT LOSS OF COSTS OF MAINTENANCE FOR EQUIPMENT BY USING TAGUCHI METHOD OF QUALITY CONTROL.

  • Erbil Technical Engineering College, Erbil Polytechnic University-Iraq.
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

Control chart is a main tool in statistical process control, it is used to promote quality level of maintenance of equipment in the firms, and it can assure loss of costs to be as lower average cost of maintenance when Taguchi method of quality control is used and by several mathematical equations in the process. As a result of huge development of equipment, the production shifted from workers to machines, then the role of maintenance much increased, and failure rates and defects amount become proportional to higher quality level of applied maintenance. As a new subject, the research tries to combine four factors of maintenance, loss of costs, x-bar control chart, and quality level, then to present equations or formulas of four types of loss of costs in order to find their values. As a new methodology, the research will aim at minimizing loss of costs, achieving small average cost of maintenance procedure in the firms, and sorting them by using Taguchi method of quality control with six of related equations.

  1. Santiago Omar Caballero Morales, Economic Statistical Design of Integrated X-bar-S Control Chart with Preventive Maintenance and General Failure Distribution, Technological University of the Mixteca, Huajuapan de Leon, Oaxaca, Mexico, 2013, Plos one, open access.
  2. Duncan AJ, The economic design of charts when there is a multiplicity of assignable causes. Journal of the American Statistical Association, 1971, No. 66, pp 107-121.
  3. Wei-Shing Chen, Fong-Jung Yu, Ruey-Shiang Guh, and Yu-Hua Lin, 2011, Economic design of x-bar control charts under preventive maintenance and Taguchi loss functions, ISSN 1735-8523 (Print), ISSN 1927-0089 (Online), Journal of Applied Operational Research, 2011, Vol. 3 (2), pp 103?109.
  4. S?nd?s DA, Real Application on Economic Design of Control Charts with R-edcc Package, The International Journal of Engineering and Science (IJES), Vol. 4, Issue 10, 2015, pp 54-65, ISSN (e): 2319 - 1813 ISSN (p): 2319 - 1805.
  5. C. Montgomery, Economic design of an X control chart, Journal of Quality Technology, 1982, Vol. 14 (1), pp 40-43.
  6. Von Collani E, A simple procedure to determine the economic design of an control chart. Journal of Quality Technology, 1986, Vol. 18, pp 145-151.
  7. Lorenzen TJ and Vance LC, The economic design of control charts: a unified approach. Technimetrics, 1986, Vol. 28, pp 3-10.
  8. Ho C and Case KE, Economic design of control charts: A literature review for 1981-1991. Journal of Quality Technology, 1994, Vol. 26, pp 39-53.
  9. Ben-Daya M and Duffuaa SO, Integration of Taguchi?s loss function approach in the economic design of chart. International Journal of Quality and Reliability Management, 2002, Vol. 20, pp 607-619.
  10. Serel DA, Economic design of EWMA control charts based on loss function. Mathematical and Computer Modeling, 2009, Vol. 49, pp 745-759.
  11. Antonio F. B. Costa, Fernando A. E. Claro, Economic Design of X (dash)Control Charts for Monitoring a First Order Autoregressive Process, Brazilian Journal of Operations & Production Management, 2009, Vol. 6, No. 2, pp. 07-26
  12. ] Ling Yang, Yuh-Rau Wang, and Suzanne Pai, Statistical and economic analyses of an EWMA-based synthesized control scheme for monitoring processes with outliers, International Journal of Systems Science, February 2012, Vol. 43, No. 2, pp. 285?295.
  13. Zu, and C. Park, An R package for the economic design of the control chart, Journal of Statistical Software, 2013, Vol. 52(9), pp 1-24.
  14. businessdictionary.com/definition/Taguchi-method.html/definition/quality-control-QC.html /definition/quality-improvement.html /definition/quality criteria.html
  15. Srinivas Athreya, Y.D.Venkatesh, Application of Taguchi Method for Optimization of Process Parameters in Improving The Surface Roughness of Lathe Facing Operation, International Refereed Journal of Engineering and Science, Nov. 2012, Vol. 1, Issue 3, (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821, pp 13-19.
  16. Hazura Mohamed, Muhammad Hisyam Lee, Bahrom Sanugi, Mazalan Sarahintu, Taguchi Approach for Performance Evaluation of Routing Protocols in Mobile Ad Hoc Networks, Journal of Statistical Modeling and Analytics, 2010, Vol. 1 No. 2, pp. 10-18.
  17. businessdictionary.com/definition/Taguchi-method.html/definition/quality-control-QC.html /definition/quality-improvement.html /definition/quality criteria.html
  18. Aravindan and S.R. Devadasan, B.V. Dharmendra, V. Selladurai, Continuous quality improvement through Taguchi?s online quality control methods, International Journal of Operations & Production Management, 1995, Vol. 15, No. 7, pp. 60-77. MCB, University Press, 0144-3577, page 62.
  19. Jasmina Mikovic, Sandra Velickovic, SrbislavAleksandrovic, Dobrivoje Catic, Application of Taguchi methods in testing tensile strength of polyethylene, 8th International Quality Conference May 23rd 2014, Center for Quality, Faculty of Engineering, University of Kragujevac, Page 575- 576.
  20. Mc Kone KE, Schroeder RG and Cua KO, The impact of total productive maintenance practices on manufacturing performance. Journal of Operations Management, 2001, Vol. 19, pp. 39-58.
  21. Ben-Daya M, Integrated production maintenance and quality model for imperfect process, 1999, IIE Transactions
  22. Chang CP, Chin H, Hsiao YD and Yu FJ, Effect of Preventive Maintenance on the Economic Design of Control Chart, The 13th IFAC Symposium on Information Control Problems in Manufacturing, 2009, Moscow, Russian, pp. 1688-1691.
  23. A. A. Cox, 2013, An Approximate Approach to the Economic Design of x Charts By Considering the Cost of Quality, Journal of Modern Applied Statistical Methods, May 2013, Vol. 12, No. 1, 170-180, JMASM, Inc., 1538 - 9472, page 170.
  24. Giovanni Celano, On the constrained economic design of control charts: a literature review, Produ??o, Jun. 2011, Vol. 21, No. 2,. University of Catania, Italy, pp. 223-234.
  25. Rok Zupančič, Alojzij Sluga, 2008, Economic Design of Control Charts, Strojni?ki vestnik - Journal of Mechanical Engineering, 2008, Vol. 54, No. 12, pp. 855-865.
  26. S.N. Murthy, Y. Rambabu, Design and Application of Economical process Control charts, Defense science journal, January 1997, Vol. 47, No. 1, pp 45-53.
  27. Rahim MA and Banerjee PK,, A generalized model for the economic design of control chart for production systems with increasing failure rate and early replacement, Navel Research Logistics, 1993, Vol. 40, pp. 787-809.

[Abdulkhalek M. Kadir. (2017); A STUDY ABOUT LOSS OF COSTS OF MAINTENANCE FOR EQUIPMENT BY USING TAGUCHI METHOD OF QUALITY CONTROL. Int. J. of Adv. Res. 5 (Sep). 1525-1533] (ISSN 2320-5407). www.journalijar.com

Abdulkhalek M. Kadir
Erbil Technical Engineering College Erbil Polytechnic University-Iraq

DOI:

Article DOI: 10.21474/IJAR01/5475      
DOI URL: http://dx.doi.org/10.21474/IJAR01/5475

Download Full Paper

Download PDF No. of Downloads: 29 | No. of Views: 108