01May 2019


  • Senior Resident, Department of Prosthodontics, Government Dental College, Srinagar.
  • PG Scholar, Department of Prosthodontics.
Crossref Cited-by Linking logo
  • Abstract
  • References
  • Cite This Article as
  • Corresponding Author

Good marginal adaptation is the most important characteristic for the long-term success of complete coverage restorations. Marginal adaptation is essential for the prevention ofmicroleakage. Improper fit can affect the fracture strength of silica-based ceramic crowns, reducing the strength and longevity of the restoration. Thus, a technique of seal improvement is described.

  1. Sjogren, G. (1995) Marginal and Internal Fit of Four Different Types of Ceramic Inlays after Luting An in Vitro Study. ActaOdontologicaScandinavica, 53, 24-28.
  2. Koernschild, K.L. and Campbell, S.D. (2000) Periodontal Tissue Responses after Insertion of Artificial Crowns and Fixed Partial Dentures. The Journal of Prosthetic Dentistry, 84, 492-498.
  3. Cooper TM, Christensen GJ, Laswell HR, Baxter R. Effect of venting on cast gold full crowns. J Prosthet Dent 1971; 26:621-6.
  4. Van Nortwick WT, Gettleman L. Effect of internal relief, vibration, and venting on the vertical seating of cemented crowns. J Prosthet Dent 1984; 45:395-9.
  5. Rossetti P, Valle A, Carvalho R, Goes M, Pegoraro L. Correlation between margin fit and microleakage in complete crowns cemented with three luting agents. J Appl Oral Sci 2008; 16:64-9.
  6. Lawn BR, Deng Y, Lloyd IK, Janal MN, Rekow ED, Thompson VP. Materials design of ceramic-based layer structures for crowns. J Dent Res 2002; 81:433-8.
  7. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999; 81:652-61.
  8. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 1995; 74:1253-8.

[Mohammad Altaf Tantray and Udfer Hameed. (2019); MARGINAL SEAL IMPROVING TECHNIQUE IN ALL CERAMIC CROWNS. Int. J. of Adv. Res. 7 (5). 1-3] (ISSN 2320-5407). www.journalijar.com



Article DOI: 10.21474/IJAR01/8997       DOI URL: http://dx.doi.org/10.21474/IJAR01/8997

Share this article