15Nov 2019

THE IMPLEMENTATION OF FUZZY FAILURE MODE AND EFFECT ANALYSIS (FFMEA) IN REDUCING THE RISK OF RUBBER AUTOMOTIVE SPARE PARTS

  • Politeknik STMI - Ministry of Industry, Jakarta
  • Department of Agroindustrial Technology, Faculty of Agricultural Technology, Bogor Agricultural University, Dramaga, Bogor 16680, Indonesia
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

Reducing a risk cannot be separated from the implementation of an integrated production systems quality control, so that, the output is marketable. Hence, the implementation of Fuzzy Failure Mode and Effect Analysis (FFMEA) will generate many problems especially in terms of increasing the cost, time and work as existences of the problems in the implementation of FFMEA in reduced the risk. Rubber automotive SMEs needs to apply a method of FFMEA that is easy to apply and give good results to reduce and prevents the occurrence of such damage. Furthermore, to explore the impact of the implementation FFMEA in quality control and reducing production risk of SMEs, a total of 8 rubber automotive spare parts companies in Bandung, West Java, Indonesia. It found, that in Indonesian SMEs, the implementation of FFMEA is not an easy task to give good results. Some problems faced by SMEs are still high damage on Rubber Seal production process. The results of the discussion show that the biggest problem experienced by the injection forming process section because it has the highest Fuzzy Risk Priority number (FRPN) value of 717. This method has advantages, which can prevent or detect earlier from the damage experienced and can determine which type of damage should be prioritized to be given the solution gradually


  1. Besterfield, Dale. 2006. Total Quality Mangement. New Jersey: Prentice Hal.
  2. Braglia, M. (2000) MAFMA:multi‐attribute failure mode analysis. Emerald insight: University of Pisa, Italy
  3. Chrysler LLC. 2008. Potential Failure Mode And Effects Analysis. Ford Motor Company, General Motors Corporation.
  4. Dinmohammadi, M. Shafiee. 2013. A Fuzzy-FMEA Risk Assessment Approach for Offshore Wind Turbines., International Journal of Prognostics and Health Management, ISSN 2153-2648.
  5. Feigenbaum, Armand V. 1996. Kendali Mutu Terpadu. Edisi Ketiga Jilid 1. Jakarta: Erlangga.
  6. Gazpersz, Vincent. 1998. Statistical Process Control: Penerapan Teknik-Teknik Statistik Dalam Manajemen Bisnis Total. Jakarta: Gramedia Pustaka Utama.
  7. Gazpersz, Vincent. 2002. Total Quality Management. Jakarta: Gramedia Pustaka Utama.
  8. Gazpersz, Vincent. 2003. Metode Analisa Untuk Peningkatan Kualitas. Jakarta: Gramedia Pustaka Utama.
  9. Kusumadewi, Sri., Purnomo, Hari. 2002. Analisis & Desain Fuzzy Menggunakan Tool. Box Matlab. Yogyakarta: Graha Ilmu.
  10. Kusumadewi, Sri., Purnomo, Hari. 2010. Aplikasi Logika Fuzzy untuk Pendukung Keputusan. Edisi Kedua Cetakan Pertama. Yogyakarta: Graha Ilmu.
  11. , E, Robin. 2009. The Basic of FMEA. Edisi 2. USA : CRC Press.
  12. G. M?rquez, A. M. Tobias, J. M. P. P?rez and M. Papaelias, ?Condition Monitoring of Wind Turbines: Techniques and Methods,? Renewable Energy, Vol. 46, 2012, pp. 169-178.?http://dx.doi.org/10.1016/j.renene.2012.03.003
  13. Pande, Peter S., 2002. ????? The Six Sigma Way. Edisi 1. Yogyakarta: Andi.
  14. Pillay, A. and Wang, J. (2003) Modified Failure Mode and Effects Analysis Using Approximate Reasoning. Reliability Engineering & System Safety, 79, 69-85. http://dx.doi.org/10.1016/S0951-8320(02)00179-5
  15. Puente, Javier. 2002. Artificial Intelligence Tools for Applying Failure Mode and Effect Analysis (FMEA). Spain: Universidad de Oviedo.
  16. RK Sharma, D Kumar, P Kumar?- International Journal of Quality & Reliability??, 2005 Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling
  17. Zilberstein, \\\\\\\"Using Anytime Algorithms in Intelligent systems\\\\\\\", AI Magazine, 17(3), 1996, pp. 73-83.
  18. Suryana, Irene. 2010. Penerapan Fuzzy FMEA, MAFMA dan Fuzzy AHP pada Perbaikan Proses Produksi Ban Radial di PT Bridgestone Tire Indonesia. Jakarta: Universitas Trisakti.
  19. Tay, K.M?and Lim. 2006. Fuzzy FMEA with a guided rules reduction system for prioritization of failures., School of Electrical and Electronic Engineering, University of Science Malaysia, Penang, Malaysia : Emerald insight
  20. Zimmermann, H-J.. 1996. Fuzzy Set Theory and Its Application, 4th edition, Springer Science Business Media.

[D A Marizka, Y Arkeman, S Raharja, H Hardjomidjojo and O Suparno (2019); THE IMPLEMENTATION OF FUZZY FAILURE MODE AND EFFECT ANALYSIS (FFMEA) IN REDUCING THE RISK OF RUBBER AUTOMOTIVE SPARE PARTS Int. J. of Adv. Res. 7 (11). 200-210] (ISSN 2320-5407). www.journalijar.com


Dewi Auditiya Marizka
Department of Agroindustrial Technology, Faculty of Agricultural Technology, Bogor Agricultural University, Dramaga, Bogor 16680, Indonesia

Share this article