FLOW ANALYSIS OF BOTTOM CASE
- Cite This Article as
- Corresponding Author
Injection molding is a net shape manufacturing process in which a polymer melt is forced into an evacuated mold cavity that cools the polymer melt into a desired shape. Injection molding has been a challenging process for many manufacturers and researchers to produce products meeting requirements at the lowest cost. Moldflow Plastics Insight software represents the most comprehensive suite of definitive tools for simulating, analyzing, optimizing, and validating plastics part and mould designs. It gives detailed information about the processing conditions. It has now become a prerequisite to validate the design and reduce the iteration involved in trial and error method of manufacturing tools. The lead time is also drastically reduced. This paper interprets the result done on gate analysis, fill analysis using MPI software. In this paper, injection molding process analysis is presented for Bottom case of Energy meter assembly.
[RAHUL S. KHICHADI (2014); FLOW ANALYSIS OF BOTTOM CASE Int. J. of Adv. Res. 2 (2). 0] (ISSN 2320-5407). www.journalijar.com
Share this article
This work is licensed under a Creative Commons Attribution 4.0 International License.