2D AND 3D NUMERICAL MODELING OF THE HAJJAR MAGNETIC CENTRAL OREBODY.
- Universite Ibn Tofail, Faculte des Sciences, Laboratoire Geosciences des Ressources Naturelles, B.P 133, 14000, Kenitra, Maroc.
- Ministere de l’Energie, des Mines, de l’Eau et de l’Environnement, Rabat Instituts 6208 - Haut Agdal - Rabat, Maroc
- Abstract
- Keywords
- Cite This Article as
- Corresponding Author
The choice of the Hajjar mine was not randomly selected. The Hajjar ore body and following its geophysics properties is regarded as a typical example to make several geophysics studies. The gravimetric and magnetic data allows validating several geophysics models by different methods. However, our goal is modelling the ore body mining resource while being based on the magnetic processing and data analysis, by using Oasis montaj software, we will make possible an almost exact morphology and define different ore body parameters. The 2D and 3D modelization to the mining resource. While being based on two approaches, the first is based on themagnetic processing, data analysisand 2D inversion by Different extensions (PotentQ and Oasis montaj inversion) to define different ore body parameters. The second is 3D Forward modelling by GM-SYS 3D. The last model will allow us to definethe distribution of the susceptibility as 3 components (x, y, z) in the basement of the regionand 3D representation of ore body.
[Saad Soulaimani, Fatima EL Hmidi, Ahmed Manar, Said Chakiri and Wafae Nouaim. (2016); 2D AND 3D NUMERICAL MODELING OF THE HAJJAR MAGNETIC CENTRAL OREBODY. Int. J. of Adv. Res. 4 (Oct). 969-995] (ISSN 2320-5407). www.journalijar.com
