A CRITICAL REVIEW ON PARAMETRIC INFLUENCE OF JOURNAL BEARING

  • Assistant Professor, Department of mechanical engineering, S.G.T. University,Gurugram(Haryana).
  • Research Scholar, Department of mechanical engineering, G.J.U.S. & T. Hisar (Haryana).
  • Research Scholar, Department of mechanical engineering, Thapar University, Patiala (Punjab).
Crossref Cited-by Linking logo

  • Abstract
  • References
  • How to Cite This Article
  • Corresponding Author

The innovatory modifications in the field of journal bearing are at quite slow speed. In the field of tribology tools requires high stiffness to improve accuracy. Thus it is necessary for the designer to study the parametric influence of journal bearing quantitative as well as qualitative. This article provides a brief review for journal bearing from available literature in recent years. Since there have been lot of developments in design, the parametric optimization has been performed by many researchers. Numbers of researchers have been working on different aspects of performance of the journal bearing, ranging from temperature rise, geometry of grooves, damping, eccentricity ratio and clearance etc. Based on the state of art in bearing identification, valuable discussions are made with future directions.

  1. Hughes and F. Osterle, “Temperature Effects in Journal Bearing Lubrication,” ASLE Transactions, Vol. 1, no.1, pp 210-212, 1958
  2. Basri and D.T. Gethin, “A Comparative Study of The Thermal Behaviour of Profile Bore Bearings,” Tribology International, Vol. 23, pp 265-276, 1990
  3. Cupillard, S. Glavatskih, M.J.Cervantes, “Computational Fluid Dynamics Analysis of A Journal Bearing with Surface Texturing,” Proc. IMechE, Engineering Tribology, Vol. 222, no.2, pp 97-107, 2008
  4. P. Gertzos, P.G. Nikolakopoulos, C.A. Papadopoulos, “CFD Analysis of Journal Bearing Hydrodynamic Lubrication by Bingham Lubricant,” Tribology International, Vol. 41, no.12, pp 1190-1204, 2008
  5. Liu, H. Xu , P. J. Ellison ,Z. Jin, “Application of Computational Fluid Dynamics And Fluid–Structure Interaction Method to The Lubrication Study of A Rotor–Bearing System,” Tribology Letters, Vol. 38, pp 325-336, 2010
  6. Lin, C. Hwang and R. Yang, “Hydrodynamic Lubrication of Long, Flexible, Porous Journal Bearings Using The Brinkman Model,” Wear, Vol. 198, pp 156-164, 1996
  7. B.W. Nabhan, G.A. Ibrahim and M.Z. Anabtawi, “Analysis of Hydrodynamic Journal Bearings Lubricated With A Binary Water-Based Lubricant,” Wear, Vol. 209, pp 13-20, 1997
  8. E. Rasheed, “Effect of Surface Waviness on The Hydrodynamic Lubrication of A Plain Cylindrical Sliding Element Bearing,” Wear, Vol. 223, pp 1-6, 1998
  9. K. Guha, “Analysis of Steady-State Characteristics of Misaligned Hydrodynamic Journal Bearings with Isotropic Roughness Effects,” Tribology International, Vol. 33, pp 1-12, 2000
  10. Cho, H. Shin and D. Han, “A Study on The Circumferential Groove Effects on The Minimum Oil Film Thickness in Engine Bearings,” KSME International Journal, Vol. 14, pp 737-743, 2000
  11. Biswas and P. Chakraborti, “Transient Analysis Of 3 Lobe Bearing Considering Surface Roughness Effect For Gas Turbine,” 6th BSME International Conference On Thermal Engineering (ICTE ), 2014
  12. Sep, A. Kucaba-Pietal, “Experimental Testing of Journal Bearings With Two-Component Surface Layer in The Presence of An Oil Abrasive Contaminant,” Wear, Vol. 249, pp 1090-1095, 2001
  13. H. Rho, K.W. Kim, “Acoustical Properties of Hydrodynamic Journal Bearings,” Tribology International, Vol. 36, pp 61-66, 2003
  14. H. Rho, D.G. Kim and K.W. Kim, “Effects of Design Parameters on The Noise of Rotor-Bearing Systems,” Tribology International, Vol.37, pp 599-605, 2004
  15. W. Wu, G.J. Ma, “Abnormal Behaviour of A Hydrodynamic Lubrication Journal Bearing Cause by Wall Slip,” Tribology International , Vol. 38, pp 492-499, 2005.
  16. G. Nikolakopoulos, C. A. Papadopoulos, “A Study of Friction in Worm Misaligned Journal Bearings Under Severe Hydrodynamic Lubrication,” Tribology International, Vol.41, pp 461-472, 2008
  17. Singh, L. Roy and M. Sahu, “Steady-State Thermo-Hydrodynamic Analysis of Cylindrical Fluid Film Journal Bearing with An Axial Groove,” Tribology International, Vol. 41, pp 1135-1144, 2008
  18. A.V.Ostayen, “Film Height Optimization of Dynamically Loaded Hydrodynamic Slider Bearings,” Tribology International, Vol. 43, pp 1786-1793, 2010
  19. Z. Szeri, “Composite-film Hydrodynamic Bearings,” International Journal of Engineering Science, Vol. 48, pp 1622-1632, 2010
  20. Lui, W. Zhao, B. Lu and J. Zhang, “A Zero Wear Assembly of A Hydrodynamic Bearing and A Rolling Bearing Assembly and Manufacturing,” IEEE Conference, pp 1-4, 2011
  21. M. Panday, P. L. Choudhury and N. P. Kumar, “Numerical Unsteady Analysis of Thin Film Lubricated Journal Bearing,” International Journal of Engineering And Technology, Vol. 4, No. 2, 2012
  22. Tala-Ighil, M. Fillon and P. Maspeyrot, “Effect of Textured Area on The Performances of A Hydrodynamic Journal Bearing,” Tribology International, Vol. 44, pp 211-219, 2011
  23. K. Meybodi, A. Assempourand and S. Farahani, “A General Methodology for Bearing Design in Non-Symmetric T-Shaped Sections in Extrusion Process,” Journal of Materials Processing Technology, Vol. 212, pp 249- 261, 2011
  24. T. McAllister and S.M. Rohde, “Optimum Design of One-Dimensional Journal Bearings,” J. Optimization Theory and Application, Vol.41, no. 4, pp 599-617, 1983
  25. Hashimoto, “Optimization of Oil Flow Rate and Oil Film Temperature Rise in High Speed Hydrodynamic Journal Bearings,” Journal of Tribology Series, Vol. 34, pp 205-210, 1998
  26. Vats, B.C. Sharma, S. Sharma, “Heat Transfer Through Journal Bearing: A Case Study,” International Journal of Research in Engineering and Technology, Vol.3, no.10, pp 216-221, 2014
  27. Samuel Cupillard, Michel J. Cervantes And Sergei Glavatskih, “A CFD study of a Finite Textured Journal Bearing,” 24th Symposium on Hydraulic Machinery and Systems, pp 1-11,2008
  28. Jin, W. Zuo, “Simulation And Heat Transfer Calculation on A Journal Bearing with  Center Circumferential Groove in Load Zone,” International Journal of Advancements in Computing Technology, Vol. 5, no.1, 2013
  29. C. Kumar, R. Ganapathi, “CFD Analysis on Hydrodynamic Plain Journal Bearing using Fluid Structure Interaction Technique,” International Journal of Engineering Research & Technology, Vol. 4, no.7, 2015
  30. P. Gertzos, P.G. Nikolakopoulos, C.A. Papadopoulos, “Lubrication By Bingham Lubricant,” Tribology International, Vol.41, pp 1190-1204, 2008
  31. S. Shenoy, R. S. Pai, D. S. Rao, R. Pai, “Elasto-Hydrodynamic Lubrication Analysis Of Full 360o Journal Bearing Using CFD And FSI Techniques,” World Journal of Modelling and Simulation, Vol. 5, no. 4, pp. 315-320, 2009
  32. Dhande, D. W. Pande, V. Chatarkar, “Analysis Of Hydrodynamic Journal Bearing Using Fluid Structure Interaction Approach,” International Journal of Engineering Trends and Technology, Vol.4, no.8, 2013
  33. Ouadoud, A. Mouchtachi, N. Boutammacht, “Hydrodynamic Journal Bearing,” Journal of Advanced Research in Mechanical Engineering, Vol. 2, no.1, pp. 33-38, 2011
  34. M. Mane, S. Soni, “Analysis of Hydrodynamic Plain Journal Bearing,” The Proceedings of COMSOL Conference in Bangalore, 2013
  35. Torgal, R. Saini, “Calculation of Equivalent Oil Film Temperature of Journal Bearing Using ANSYS,” International Journal of Science Technology & Engineering, Vol. 1, no. 12, 2015
  36. Panthi, J. Balwanshi, A. Chandravanshi,  G. Gupta, “ Design and Analysis of Hydrodynamic Journal Bearing Using Raimondi and Boyd Chart,” International Journal of Core Engineering & Management Vol. 2, no. 3, 2015
  37. Sahu, A. K. Giri, A. Das, “Thermohydrodynamic Analysis Of A Journal Bearing Using CFD As A Tool,” International Journal Of Scientific And Research Publications, Vol. 2, no. 9, pp 2250-3153, 2012
  38. Singla, A. Kumar, S. Bala, P. Singh, A. Chauhan, “Thermo-Hydrodynamic Analysis On Temperature Profile Of Circular Journal Bearing Using Computational Fluid Dynamics,” Proceedings of RAECS Chandigarh, 2014
  39. Tiwari and V. Kumar, “Analysis Of Hydrodynamic Journal Bearing Using CFD And FSI Technique,” International Journal Of Engineering Research & Technology, pp 2278-0181 ,Vol. 3, no. 7, 2014
  40. Yong, R. Balendra, “CFD Analysis on The Lubrication Behaviours Of Journal Bearing With Dimples,” Proceedings of IEEE International Conference on Mechatronics And Automation, Changchun, China, 2009.

Paramvir Yadav, Kaushal Kumar, Vinay Singh and Gurprit Singh. (2017); A CRITICAL REVIEW ON PARAMETRIC INFLUENCE OF JOURNAL BEARING, Int. J. of Adv. Res., 5 (01), 1902-1908, ISSN 2320-5407. DOI URL: https://dx.doi.org/10.21474/IJAR01/2959

Paramvir Yadav
Mechanical Engineering Department, SGT University, Gurugram Haryana.

DOI:

Article DOI: 10.21474/IJAR01/2959      
DOI URL: https://dx.doi.org/10.21474/IJAR01/2959

Download Full Paper

Download PDF No. of Downloads: 32 | No. of Views: 135