30Apr 2017

CFD ANALYSIS OF DOUBLE TUBE HELICAL COIL HEAT EXCHANGER FOR DIFFERENT HEAT TRANSFER CHARACTERISTICS.

  • Department of mechanical engineering, JSS Academy of Technical Education, Noida, India.
  • Assistant Professor, Department of Mechanical Engineering, JSS Academy of Technical Education, Noida, India.
Crossref Cited-by Linking logo

  • Abstract
  • References
  • Cite This Article as
  • Corresponding Author

The purpose of this analysis is to determine the variation in the temperature drop, heat transfer rate and pressure when the number of turns in a double tube helical coil heat exchanger are changed. The boundary conditions are kept same but the number of turns of the coil is changed. For the analysis, ANSYS Fluent 15.0 has been used.

  1. Daniel Florez- Orrego,.2012. Experimental and CFD study of a single phase cone- shaped helical coiled heat exchanger: an empirical correlation. ECOS.
  2. S. Jayakumara, S.M. Mahajania, J.C. Mandala, Kannan N. Iyer a, P.K. Vijayan,.2010. CFD analysis of single-phase flows inside helically coiled tubes. Computers and Chemical Engineering 34. 430?446.
  3. Timothy John Rennie,. 2004. Numerical and experimental studies of a double pipe Helical Heat Exchanger. Dept. of Bio- resource Engg. McGill University, Montreal.
  4. S. Jayakumar, S.M. Mahajani, J.C. Mandal, P.K. Vijayan, Rohidas Bhoi,.2008. Experimental and CFD estimation of heat transfer in helically coiled heat exchangers. chemical engineering research and design 8 6. 221?232.
  5. Usman Ur Rehman,.Heat transfer optimization of shell-and-tube heat exchanger through CFD studies. Chalmers University of technology.
  6. Nawras H. Mostafa Qusay R. Al-Hagag,.2012. Structural and thermal analysis of heat exchanger with tubes of elliptical shape.IASJ,Vol-8 Issue-3.
  7. K.E. Reby Roy,. 2012. Numerical analysis of forced convection heat transfer through helical channels.IJEST, vol-4.
  8. Minton P.E., may 1970. Designing Spiral tube heat exchanger. Chemical engineering. p.145.
  9. Ender Ozden, Ilker Tari,.2010. Shell side CFD analysis of a small shell-and-tube heat exchanger. Energy Conversion and Management 51. 1004?1014.
  10. G. Prabhanjan, G. S. V. Ragbavan and T. J. Kennic,.2002. Comparision of heat transfer rates between a straight tube heat exchanger and a helically coiled heat exchanger. International Comm. Heat transfer,volume. 29. No.2. pp. 185-191.
  11. Rahul Kharat, Nitin Bhardwaj, R.S. Jha,.2009. Development of heat transfer coefficient correlation for concentric helical coil heat exchanger. International Journal of Thermal Sciences 48. 2300?2308.
  12. Vimal Kumar, Supreet Saini, Manish Sharma, K.D.P. Nigam.,2006. Pressure drop and heat transfer study in tube-in-tube helical heat exchanger. Chemical Engineering Science. 4403 ? 4416.
  13. Nasser Ghorbani , Hessam Taherian , Mofid Gorji, Hessam Mirgolbabaei ,.2010. An experimental study of thermal performance of shell-and-coil heat exchangers. International Communications in Heat and Mass Transfer 37. 775?781.

[Priyanshu Dradhomar, Subhashini Verma1,Vikas Singh, Pallavi Dradhomar and Manjunatha. M. (2017); CFD ANALYSIS OF DOUBLE TUBE HELICAL COIL HEAT EXCHANGER FOR DIFFERENT HEAT TRANSFER CHARACTERISTICS. Int. J. of Adv. Res. 5 (Apr). 1752-1757] (ISSN 2320-5407). www.journalijar.com

priyanshu dradhomar
department of mechanical engineering, JSS Academy of Technical Education Noida india

DOI:

Article DOI: 10.21474/IJAR01/4006      
DOI URL: https://dx.doi.org/10.21474/IJAR01/4006

Download Full Paper

Download PDF No. of Downloads: 84 | No. of Views: 260