31May 2017

FAILURE INVESTIGATION FOR INPUT SHAFT OF AUXILIARY HOIST GEAR BOX.

  • Dr. D.Y. Patil School of Engineering, Lohegaon Campus, Pune, Maharashtra, India.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

This review paper gives the insights of various analysis & tests carried out to find shaft failure type & its causes. Failed shaft is used in auxiliary hoist gear box for torque transmission. Shaft failed with fewer cycles of operations in very early stage of life span. The various literatures has been systematically studied, compared and reviewed to get a proper shaft failure analysis and their causes. Every analysis method has its advantages and disadvantages and used by specific industrial areas. Shaft failure causes the unnecessary shutdowns and leads to larger production losses. The objective of this paper is to study various shafts failure analysis techniques and select the best method to find out the root cause for failure of shaft used in crane hoist.

  1. Sumit P. Raut*, Laukik P. Raut# * M. Tech (CAD/CAM), Failure Analysis and Redesign of Shaft of Overhead Crane, Int. Journal of Engineering Research and Applications, ISSN : 2248-9622, Vol. 4, Issue 6 ( Version 3), June 2014, pp.130-135
  2. Zˇ . Domazet, F. Luk?a, M. Bugarin, Failure of two overhead crane shafts, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Rud-era Bo?kovi?ca 32,? 21000 Split, Croatia
  3. Shaft Charnont Moolwana,*, Samroeng Netpub, Failure Analysis of a Two High Gearbox, Department of Industrial Engineering, Faculty of Engineering, Kasem Bundit University, Bangkok, 10250, Thailand bS.H.K. Engineering Co., Ltd. Samutprakarn, 10130, Thailand
  4. ASM International: Handbook of Failure analysis and Prevention, Volume. 11, Ninth Edition.
  5. ASTM A370 Standard Test Methods and Definitions for Mechanical Testing
  6. ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
  7. ASTM E415 Standard Test Method for Atomic Emission Vacuum Spectrometric analysis of Carbon and Low Alloy Steel
  8. ASTM E3 Standard Guide for Preparation of Metallographic Specimens
  9. ASTM E407 Standard Practice for Microetching Metals and Alloys
  10. ASTM E340 Standard Test Method for Macroetching Metals and Alloys
  11. Standard Test Methods for Determining The Inclusion Content Of Steel
  12. ASTM E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
  13. ASTM E10 Standard Test Methods for Brinell Hardness of Metallic Materials.

[Rahul S Korde and Amol N Patil. (2017); FAILURE INVESTIGATION FOR INPUT SHAFT OF AUXILIARY HOIST GEAR BOX. Int. J. of Adv. Res. 5 (May). 2018-2028] (ISSN 2320-5407). www.journalijar.com

Rahul S. Korde
Self

DOI:

Article DOI: 10.21474/IJAR01/4344      
DOI URL: https://dx.doi.org/10.21474/IJAR01/4344

Download Full Paper

Download PDF No. of Downloads: 32 | No. of Views: 204