10Mar 2018

HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW.

  • Mechanical Engineering Department, Covenant University, Ota. Ogun-State, Nigeria.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

A system`s reliability during the early stage of design is an important issue for consideration. For any engineering system to be of standard it must meet certain reliability goals. These reliability goals can be achieved by assigning reliability requirements of individuals? subsystem to obtain complete system reliability. These reliability allocation to be considered based on engineering factors appear more practical functional and crucial at the early stage of design and development of items. In this paper we shall be considering the factors of influence approach under the hybrid method. These factors of influence affecting system reliability are complexity/time, the environment, cost, state-of-the-art and criticality of failure. This method aims at exposing each factor of influence and how each affects the reliability of overall system if not properly taken into consideration at various industries.

  1. Zhao Guangyan, Qin Tong, Sun Yunfeng (2011), the method of mission reliability allocated for complex system based on simulation .Vol 2 Edition 5.
  2. S Dhilion (2006), Maintainability, maintenance and reliability for Engineers. CRC press Taylor & Francis group, FL 33487-2742 Ottawa Ontario.
  3. Aggarwal, k.k (2007) Reliability Engineering Netherlands: klular Academic publishers.
  4. Kyunmee, O.K, Yoonjung Y. Ming J.Z (2013). A new reliability allocation weight for reducing the occurrence of severe failure effects, Reliability Engineering and system safety 117, 81-88
  5. Alven WH. 1964.Reliability Engineering prepared by ARINC Research Corporation. Englewood Cliffs, NJ: Prentice Hall;
  6. Department of Defense of USA. (1998)MIL-HDBK-338B. Electronic design reliability handbook,
  7. Kececioglu D.1991 Reliability engineering handbook, vol. 2. Prentice Hall;
  8. Advisory Group of Reliability of Electronic Equipment (AGREE). 1957. Reliability of military electronic equipment. Office of the Assistant Secretary of Defense Research and Engineering: Washington, DC;
  9. Mettas, A. 2000. Reliability allocation and optimization for complex systems. Proceedings of the annual Maintainability and Reliability Symposium, Los Angles: pp.216?221.29
  10. Nakagawa, Y. and Nakashima, K. (1977). A heuristic method for determining reliability allocation. IEEE Transactions on Reliability. Vol. 26: pp.156?161
  11. Abioye, A. A., Atanda, P. O., Abioye, O. P., Afolalu, S. A., & Dirisu, J. O. (2017). Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12(23), 14435-14441
  12. Kuo, W. and Prasad, V.R. (2000). An annotated overview of system reliability optimization. IEEE Transactions on Reliability Engineering. Vol. 49: pp.176?187
  13. Wang Y, Yam RCM, Zuo MJ, Tse P. (2000). A comprehensive reliability allocation method for design of CNC lathes, Reliability Engineering and System Safety. 72: 247?52.
  14. Yadav O.P, Singh, N. and Goel P.S. (2006). Reliability demonstration test planning: a three-dimensional consideration, Reliability Engineering and System Safety; 91:882-93.
  15. Itabashi-Campbell R, Yadav O. 2008. Gauging quality and reliability assurance efforts in product development process. International Journal of Process Management & Benchmarking, January; 2(3):221-233
  16. Kyungmee O. Kim, Yoonjung Yang, Ming J. Zuo. 2013. A new reliability weight for reducing the occurrence of severe failure effects, Reliability Engineering and System Safety. 117:81-88.
  17. Bracha VJ. (2004)The methods of reliability engineering, Machine Design; 7:70?76.
  18. Kuo W, Prasad VR, Tillman FA, Hwang CL.( 2001), Optimal reliability design. Cambridge University Press;
  19. Oyinbo, S. T., Ikumapayi, O. M., Ajiboye, J. S., & Afolalu, S. A. (2015). Numerical Simulation of Axisymmetric and Asymmetric Extrusion Process Using Finite Element Method. International Journal of Scientific & Engineering Research, 6(6), 1246-1259
  20. Thomas, M. U., & Richard, J. P. (2006). Warranty-based method for establishing reliability improvement targets. IIE Transactions, 38(12), 1049-1058.
  21. Saadi S, Djebabra M, Boubaker L. 2011; Proposal for a new allocation method of environmental goals applied to an Algerian cement factory. Management of Environmental Quality: An International Journal. 22:581?594.
  22. Yadav O.P (2007). System reliability allocation methodology based on three-dimensional analyses, International Journal of Reliability and Safety; edition 1:360?75.
  23. Afolalu, S. A., Salawu, E. Y., Okokpujie, I. P., Abioye, A. A., Abioye, O. P., Udo, M., & Ikumapayi, O. M. (2017). Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12(19), 8995-9003.
  24. Salawu, E.Y., Okokpujie, I.P., Afolalu, S.A., Ajayi, O.O. and Azeta, J., 2018. INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8(1), pp.915-922
  25. Orisanmi, B. O., Afolalu, S. A., Adetunji, O. R., Salawu, E. Y., & Okokpujie, I. P. (2017). Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering Research, 12(24), 14141-14147
  26. Adetunji O.R., Adegbola A.O., & Afolalu, S.A. (2015). Comparative Study of Case-Hardening and Water-Quenching of Mild Steel Rod on Its Mechanical Properties.International Journal of Advance Research, 3(6)1-9.

[Sunday A. Afolalu, Ikechi V. Ihebom, Remilekun R. Elewa,Samuel U. Ayuba and Kehinde Oluyemi. (2018); HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW. Int. J. of Adv. Res. 6 (Mar). 770-773] (ISSN 2320-5407). www.journalijar.com

DR AFOLALU ADENIRAN
COVENANT UNIVERSITY. OTA. NIGERIA

DOI:

Article DOI: 10.21474/IJAR01/6729      
DOI URL: https://dx.doi.org/10.21474/IJAR01/6729

Download Full Paper

Download PDF No. of Downloads: 5 | No. of Views: 81