30Apr 2018

REVIEW ON PERFORMANCE ANALYSIS OF HEAT EXCHANGER.

  • PG Scholar, ShriRam College of Engineering & management, Banmore. M. P.
  • Professor, ShriRam College of Engineering & management, Banmore. M. P.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

Heat Exchanger is the key part in a thermal industry .Hence performance of heat exchanger affects the quality and productivity of thermal plant .Industrial management focusing on the development of mechanism of plant up to the optimum level to achieve lean and agile manufacturing of product. With the same view we need to optimize the performance of each machine of plant. To optimize the function of heat exchanger. This review it is an act to find the no of parameters and mode of heat exchanging which affects the performance of heat exchanger.

  1. Christopher Ian Wright, ?Effective management of heat transfer fluid flash point temperatures using a light-ends removal kit (LERK)?, Case Studies in Thermal Engineering, Vol. 4, pp. 9?14, 2014.
  2. C. Weikla, K. Braunb and J. Weiss, ?Coil-wound heat exchangers for molten salt applications?, Energy Procedia, Vol. 49, pp. 1054 ? 1060, 2014.
  3. Tonio Sant and Robert N. Farrugia, ?Modeling the Energy Yield Enhancement From a Wind Turbine at a Deep Offshore Low Wind Site Through Combined Power and Thermocline Energy Production?, Journal of Solar Energy Engineering, Vol. 137/ 011002, pp. 1-8, 2015.
  4. Guo-yan Zhou, Ling-Yun Zhu, Hui Zhu, Shan-tung Tu and Jun-jie Lei, ?Prediction of temperature distribution in shell-and-tube heat Exchangers?, Energy Procedia, Vol. 61, pp. 799 ? 802, 2014.
  5. Saneipoor, G. F. Naterer and I. Dincer, ?Transient Temperature Response of Variable Flow Heat Exchangers in a Marnoch Heat Engine?, Journal of Heat Transfer, Vol. 136/ 111801, pp. 1-8, 2014.
  6. Neda Gilani and Amin Haghighi Poshtiri, ?Heat Exchanger Design of Direct Evaporative Cooler Based on Outdoor and Indoor Environmental Conditions?, Journal of Thermal Science and Engineering Applications, Vol. 6/ 041016, pp. 1-9, 2014.
  7. Nopparat Katkhawa, Nat Vorayos, Tanongkiat Kiatsiriroat, Yottana Khunatorn, Damorn Bunturat and Atipoang Nuntaphan, ?Heat transfer behavior of flat plate having 45? ellipsoidal dimpled surfaces?, Case Studies in Thermal Engineering, Vol. 2, pp. 67?74, 2014.
  8. Eiamsa-ard, N.Piriyarungroj, C.Thianpong and S.Eiamsa-ard, ?A case study on thermal performance assessment of a heat exchanger tube equipped with regularly-spaced twisted tapes as swirl generators?, Case Studies in Thermal Engineering, Vol. 3, pp. 86?102, 2014.
  9. Hatami, D.D.Ganji and M.Gorji-Bandpy, ?Numerical study of finned type heat exchangers for ICEs exhaust waste heat recovery?, Case Studies in Thermal Engineering, Vol. 4, pp. 53?64, 2014.
  10. Shengqiang Bai, HongliangLu, TingWu, XianglinYin, XunShi and Lidong Chen, ?Numerical and experimental analysis for exhaust heat exchangers in automobile thermoelectric generators?, Case Studies in Thermal Engineering, Vol. 4, pp. 99?112, 2014.
  11. Vahabzadeh, D.D.Ganji and M.Abbasi, ?Analytical investigation of porous pin fins with variable section in fully-wet conditions?, Case Studies in Thermal Engineering, Vol. 5, pp. 1?12, 2015.
  12. Sunil Chamoli, ?A Taguchi approach for optimization of flow and geometrical parameters in a rectangular channel roughened with V down perforated baffles?, Case Studies in Thermal Engineering, Vol. 5, pp. 59?69, 2015.
  13. Srinivasan, S.Muthu, S.R.Devadasan and C.Sugumaran, ?Enhancing effectiveness of Shell and Tube Heat Exchanger through Six Sigma DMAIC phases?, Procedia Engineering, Vol. 97, pp. 2064 ? 2071, 2014.
  14. Jiin-Yuh Jang, Ling-Fang Hsu and Jin-Sheng Leu, ?Optimization of the span angle and location of vortex generators in a plate-fin and tube heat exchanger?, International Journal of Heat and Mass Transfer, Vol. 67, pp. 432?444, 2013.
  15. Azher M.Abed, K.Sopian, H.A.Mohammed, M.A.Alghoul, Mohd Hafidz Ruslan, SohifMat and Ali Najah AlShamani, ?Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids?, Case Studies in Thermal Engineering, Vol. 5, pp. 13?23, 2015.
  16. Ali Najah Al-Shamani, K.Sopian, H.A.Mohammed, SohifMat, Mohd Hafidz Ruslan and Azher M.Abed, ?Enhancement heat transfer characteristics in the channel with Trapezoidal rib?groove using nanofluids?, Case Studies in Thermal Engineering, Vol. 5, pp. 48?58, 2015.
  17. Chandraprabu, G. Sankaranarayanan, S. Iniyan, and S. Suresh, ?Heat Transfer Enhancement Characteristics of Al2O3/Water and CuO/Water Nanofluids in a Tube in Tube Condenser Fitted With an Air Conditioning System?An Experimental Comparison?, Journal of Thermal Science and Engineering Applications, Vol. 6/ 041004, pp. 1-5, 2014.
  18. Dustin R. Ray and Debendra K. Das, ?Superior Performance of Nanofluids in an Automotive Radiator?, Journal of Thermal Science and Engineering Applications, Vol. 6/ 041002, pp. 1-16, 2014.
  19. Yanhui Han, Yan Liu, Ming Lia and Jin Huang, ?A review of development of micro-channel heat exchanger applied in air-conditioning system?, Energy Procedia, Vol. 14 , pp. 148 ? 153, 2012.
  20. Mushtaq Ismael Hasan, Hayder Mohammed Hasan and Ghassan Adnan Abid, ?Study of the axial heat conduction in parallel flow microchannel heat exchanger?, Journal of King Saud University ? Engineering Sciences, Vol. 26, pp. 122?131, 2014.
  21. M. Manglik, O. A. Huzayyin and M. A. Jog, ?Fin Effects in Flow Channels of Plate-Fin Compact Heat Exchanger Cores?, Journal of Thermal Science and Engineering Applications, Vol. 3/ 041004, pp. 1-9, 2011.

[Amit Rajput and Prof. Arvind Pathak. (2018); REVIEW ON PERFORMANCE ANALYSIS OF HEAT EXCHANGER. Int. J. of Adv. Res. 6 (Apr). 1261-1265] (ISSN 2320-5407). www.journalijar.com

AMIT RAJPUT
Research scholer

DOI:

Article DOI: 10.21474/IJAR01/6976      
DOI URL: https://dx.doi.org/10.21474/IJAR01/6976

Download Full Paper

Download PDF No. of Downloads: 9 | No. of Views: 100