20May 2019

PROPERTIES OF STONE WOOL PRIMARY FIBER LAYERS PRODUCEDWITH DIFFERENT CONTENTS OD BLAST FURNACE SLAG.

  • University of Zenica, Institute Kemal Kapetanovic, Zenica, BiH.
  • University of Zenica, Faculty of Metallurgy and Technology, Zenica, BiH.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

Among the inevitable by-products of the metallurgical industry, special importance is given to waste from the iron and steel production. The blast furnace slag is not only the by-product, but rather it is also of a valuable resource as a substitute for the natural mineral aggregates. The chemical composition of blast furnace slag is similar to the composition of natural mineral rocks and is recognized as a potential raw material in stone wool production. The primary layer formation process is an important part of the mineral wool production line and it was simulated experimentally on a model of the spinning machine. This paper presents research of the mineral fibers mechanical properties based on mixture of blast furnace slag and diabase. Based on the results of a study carried out on the formation and the properties of stone wool fibers, it can be concluded that the blast furnace slag as a dominant component can be used to produce stone wool.

  1. Mineral Wool I Putting Natural Resources to Work for the Benefit of our Planet (http://www.mineralewol.net/uploads/EURIMA-MineralWool_Sustainability_brochure.pdf)
  2. Kra?evec B. Bizjan B. ?irok B. Glass wool layer formation in the collecting chamber. Glass Technol.. Eur. J. Glass Sci. Technol. A. 2017; 58 (1): 1?7.
  3. Imamovic A. Bizjan B. Seferovic R.Mrvar P. Bombac D: MECHANICAL PROPERTIES OF MINERAL STONE WOOL FIBERS BASED ON MIXTURE OF BLAST FURNACE SLAG AND DIABASE. J. Adv. Res. 7(4). 2019.DOI:10.21474/IJAR01/8967
  4. Projekat: Osvajanje proizvodnje i karakterizacija kamene vune na bazi supstitucije prirodnih sirovina?. Federalno ministarstvo obrazovanja i nauke. Univezitet Zenica. BiH Projekat FMON 2017.
  5. Chen J. Mrvar P. ?irok B. Bizjan B. Melt film adhesion dynamics on spinning wheels. Glass Technol.. Eur. J. Glass Sci. Technol. A. 2019. 60 (1): 1?8.
  6. Bizjan B. Peternelj M. ?irok B. Mineral wool primary layer formation in collecting chamber. Journal of Mechanical Engineering 62. 2016; 3: 181-188.DOI:10.5545/sv-jme.2015.2995
  7. Du PP. Lang Y. Li ZH. Zhang YZ. Effect of acidity coefficient of molten slag on properties of slag fiber Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering. 2015; 15. 3:518-523.

[Raif Seferovic, Aida Imamovic, Dervis Mujagic, Marina Jovanovic, Amel Zahirovic And Dejana Kasapovic. (2019); PROPERTIES OF STONE WOOL PRIMARY FIBER LAYERS PRODUCEDWITH DIFFERENT CONTENTS OD BLAST FURNACE SLAG. Int. J. of Adv. Res. 7 (May). 605-611] (ISSN 2320-5407). www.journalijar.com

AIDA IMAMOVIC
METALURSKO-TEHNOLOSKI FAKULTET, UNIVERZITET ZENICA

DOI:

Article DOI: 10.21474/IJAR01/9079      
DOI URL: https://dx.doi.org/10.21474/IJAR01/9079

Download Full Paper

Download PDF No. of Downloads: 14 | No. of Views: 72