31Aug 2015

Estimation of damage in cylinder subjected to shock pressure load using finite element analysis

  • Professor, Department of Mechanical Engineering, JNTUH College of Engineering, Kukatpally, Hyderabad, Telangana State, India
  • Abstract
  • Keywords
  • Cite This Article as
  • Corresponding Author

loading on the ring stiffened cylinder using finite element analysis. The fluid medium was molded based on Tait’s equation of state. The equation of state from Jones-Wilkins-Lee (JWL) was used to describe the detonation products of explosives. The explosion and fluid were interfaced using Eulerian-Eulerian coupling and the fluid and shell were interfaced using arbitrary Lagrangian-Eulerian coupling. The damage has occurred in the cylinder surface exposed to explosion only.

[A. Chennakesava Reddy (2015); Estimation of damage in cylinder subjected to shock pressure load using finite element analysis Int. J. of Adv. Res. 3 (Aug). 522-556] (ISSN 2320-5407). www.journalijar.com

A. Chennakesava Reddy

Download Full Paper

Download PDF No. of Downloads: 24 | No. of Views: 43