25Apr 2017

STUDIES ON MICROSTRUCTURES AND PROCESSING OF SS409M SHEET.

  • Department of Mechanical Engineering, K.S.Rangasamy College of Technology Tiruchengode, Namakkal, Tamilnadu, India.
  • Department of Mechanical Engineering, K.S.R.I.E.T Tiruchengode, Namakkal, Tamilnadu India.
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

An SS409M steel sheet with a tensile strength over 1400 MPa and very good, of highest quality force of meeting below toughness was got by either using controlled rolling plus air cooling or laboratorial thermo-mechanical controlled processing . The effects of CR+AC and the TMCP processes were then inspected on the microstructures and mechanical quality of this stainless steel sheet. The results showed that by using CR+AC technology an equally distributed bainitic ferrite microstructure could be produced in this steel sheet under the right reheating and rolling condition. By using TMCP technology, a thin narrow bit of bainite and martensitic microstructure with superior mechanical properties could also be generated. A micro structural analysis was made to interprete the strengthening-toughening mechanisms in connection with the processes

  1. Aglan,H. A., Liu, Z.Y., Hassan, M.F., Fateh, M., 2004.Mechanical and Fracture Behavior of Bainitic Rail Steel. Journal of Materials Processing Technology 151(1-3), 268-274
  2. Caballero, F.G., Bhadeshia, H.K.D.H., 2004.Very Strong Bainite.Current Opinion in Solid State and Materials Science 8(3-4), 251-257
  3. Sourmail, T., Smanio, V., 2013. Optimisation of the Mechanical Properties of Air Cooled Bainitic Steel Components through Tailoring of the Transformation Kinetics. Materials Science and Engineering A 582, 257-261.
  4. Hlavat?, I., Sigmund, M., Krej, L., Mohyla, P., 2009. The Bainitic Steel for Rail Applications. Materials Engineering 16(4), 44-50.
  5. Khourshid, A.M., Gan, Y.X., Aglan, H.A., 2001. Microstructure Origin of Strength and Toughness of a Premium Rail Steel. Journal of Materials Engineering and Performance 10(3), 331-336.
  6. Singh, U.P., Roy, B., Jha, S., Bhattacharyya, S.K., 2001. Microstructure and Mechanical Properties of As Rolled High Strength Bainitic Rail Steels. Materials Science and Technology 17(1), 33-38.
  7. Wang, L.J., Cai, Q.W., Yu, W., Wu, H.B., Lei, A.D., 2010. Microstructure and Mechanical Properties of 1500 MPa Grade Ultra-high Strength Low Alloy Steel. Acta Metallurgica Sinica 46(6), 687-694.
  8. Yokoyama, H., Mitao, S., Yamamoto, S., Kataoka, Y., Sugiyama, T., 2001. High Strength Bainitic Steel Rails for Heavy Haul Railways with Superior Damage Resistance. NKK Technical Review, No.84, 44-51.
  9. S.Sampath, V.Manimaran, A.Gopinath, M.M.Gobisankar 2016. ?wear and corrosion studies on ferritic stainless steel (SS 409M)? eISSN: 2319-1163? pISSN: 2321-7308

[V. Manimaran, S.Vigneshwaran, S. Sakthivel, J. Mathan and S.Tamilvanan. (2017); STUDIES ON MICROSTRUCTURES AND PROCESSING OF SS409M SHEET. Int. J. of Adv. Res. 5 (Apr). 586-591] (ISSN 2320-5407). www.journalijar.com

V.Manimaran,S.Vigneshwaran,S.Sakthivel,J.Mathan,S.Tamilvanna
k.s.Rangasamy college of technology

DOI:

Article DOI: 10.21474/IJAR01/3850      
DOI URL: http://dx.doi.org/10.21474/IJAR01/3850

Download Full Paper

Download PDF No. of Downloads: 12 | No. of Views: 88