20Jul 2017

MICROMECHANICAL ANALYSIS OF HYBRID COMPOSITES.

  • Associate Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology & Management, Bangalore, India.
  • Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology & Management, Bangalore, India.
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

The prediction of elastic modulus of the Kevlar/Glass hybrid composites had been investigated through Rule of hybrid mixtures (RoHM) equation. Hybrid composition were studied with different fiber percentage and the relative glass fiber contents were varied up to 100 %. The experimental and predicted values were evaluated and found excellent agreement with each other.

  1. Yamada, H. Sasabe, Y. Osada and Y. Shiroda, I. Concepts of Hybrid Materials, Hybrid Materials ?Concept and Case Studies, ASM International, OH, USA, 1989
  2. Mechanical Engineers Handbook, John Wiley and sons Inc., Hoboken, 2000, Third edition, New Jersey.
  3. Yao and Wenbin Li ,Tensile, impact and dielectric properties of three dimensional orthogonal aramid/glass fiber hybrid composites, Journal of Material Science Vol? 42, 2007, pp 6494?6500
  4. Mehmood, and Raza, Hybridization effect of glass and carbon fiber on mechanical properties of epoxy based composites, Vol 32, 2010, pp 101-105.
  5. Taketa and Babu, Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene Composites, Journal of Material Science Part A 41, 2010 pp 927?932.
  6. Woven fabric Micromechanics WFM Technomic, Lancaster PA, 1991.
  7. MIKROLAM Stellbrink, K, Drosselweg 7, D-71126 Gaufelden, 1993.
  8. F. Ashby, and Y.J.M. Brechet, Acta Materialia 51 , 2003, 5801
  9. K. Mallick, ?Fiber-Reinforced Composites:Materials, Manufacturing, and Design, Third Edition?, CRC Press, Boca Raton , 2007
  10. Agarwal B.D., Broutman L.J., Analysis and Performance of Fiber Composites, John Wiley, New York, Ch.1, 1980.
  11. Jamal Mirbagheri, Mehdi Tajvidi, and John C. Hermanson, Prediction of the Elastic Modulus of Wood Flour/Kenaf Fibre/Polypropylene Hybrid Composites, Iranian Polymer Journal 16 (4), 2007, 271-278
  12. R. Mansor, S. M. Sapuan, and E. S. Zainudin, Stiffness Prediction of Hybrid Kenaf/Glass Fiber Reinforced Polypropylene Composites using Rule of Mixtures (ROM) and Rule of Hybrid Mixtures (RoHM), J. Polym. Mater. Vol. 30, No. 3, 2013, 321-334
  13. Y. Fu, G. Xu, and Y.W. Mai, Journal of Composite materials. Part B 33, 2002, 291

[M. N Gururaja and A. S Devaraja. (2017); MICROMECHANICAL ANALYSIS OF HYBRID COMPOSITES. Int. J. of Adv. Res. 5 (Jul). 820-824] (ISSN 2320-5407). www.journalijar.com

M.N Gururaja
Associate Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology& Management, Bangalore, India

DOI:

Article DOI: 10.21474/IJAR01/4785      
DOI URL: http://dx.doi.org/10.21474/IJAR01/4785

Download Full Paper

Download PDF No. of Downloads: 13 | No. of Views: 69