Vol. 5 (03) pp. 1381-1390 DOI: 10.21474/IJAR01/3645

COMPARATIVE STUDY ON TUNING METHODSFOR SISO SYSTEM.

, and
  • Department of Electronics and Instrumentation Engineering, St.Joseph’s College of Engineering, Chennai-600119, Tamilnadu, India.
18 Downloads 129 Views
Crossref

Download Full Paper (PDF)

Abstract

This paper presents various tuning methods for a first order process with time delay. The performance of IMC based PID controller is compared with other tuning methods like Modification of IMC-PID for disturbance rejection, Direct synthesis, Direct Synthesis with disturbance rejection (DS-d) and Simple Internal Model Control (SIMC).This work analyses the various parameters of the system. The comparative study of set point tracking and disturbance rejection of a first order process is evaluated using performance criteria like ISE and IAE. From the comparison it was found that IMC-PID provides better results for set-point tracking as well as for the disturbance rejection.

Keywords

Article Analytics

References

  1. Wen Tan, Jizhen Liu, Tongwen Chen, Horacio J. Marquez , “Comparison of some well-known PID tuning formulas”, Department of Automation, North China Electric Power University, Zhuxinzhuang, Dewai, Beijing 102206, PR China,Department of Electrical & Computer Engineering, University of Alberta, Edmonton, AB, Canada T6G 2V.
  2. Ziegler, J. G.; Nichols, N. B. Optimum Settings for Automatic Controllers. Trans. ASME 1943, 65, 433.
  3. Poorvi Jain and Pramod Kumar Jain, “Design Of FOPDT PID Controller By Different Tuning Methods For Industrial Process Control”, M.Tech Scholar, Electronics & Instrumentation Engineering Department, Shri G.S.I.T.S, Indore, India. Associate Professor, Electronics & Instrumentation Engineering Department, Shri G.S.I.T.S, Indore, India
  4. Madhu Kumar, V. Suma Deepthi , “Design and Development of IMC Tuned PID Controller for Disturbance Rejection of Pure Integrating Process“,PG Scholar, Malla Reddy Engineering College, India, Assistent Professor, Malla Reddy Engineering College, India
  5. Dighe Y, Prof. Kadu C and Prof. Parvat B, “Direct Synthesis Approach for Design of PID Controller”, in International Journal of Application or Innovation in Engineering & Management (IJAIEM).
  6. Daniel E. Rivera, Manfred Morari, and SigurdSkogestad, ” Internal Model Control. 4. PID Controller Design”, Chemlcal Engineering, 206-4 1, California Institute of Technology, Pasadena, California 91125.
  7. Dan Chen and Dale E. Seborg, “PI/PID Controller Design Based on Direct Synthesis and Disturbance Rejection”, Department of Chemical Engineering, University of California, Santa Barbara, California 93106.
  8. Mohammad Shamsuzzoha, ” IMC based robust PID controller tuning for disturbance rejection”, Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia Central South University Press and Springer-Verlag Berlin Heidelberg 2016.
  9. Shamsuzzoha M, Lee M, “IMC-PID controller design for improved disturbance rejection of time-elayed processes [J]”, IndEngChem Res, 2007.
  10. SigurdSkogestad, “Simple analytic rules for model reduction and PID controller tuning”, Department of Chemical Engineering, Norwegian University of Science and Technology, N-7491Trondheim , Norway.
  11. Jietae Lee, Wonhui Cho, and Thomas F. Edgar, ”Simple Analytic PID Controller Tuning Rules Revisited”, Department of Chemical Engineering, Kyungpook National University, Taegu 702-701, Korea, enGibbs, A-503 Shin Young Gwell Estates, Bansong-dong, 93-10, Hwasung, Gyeonggi 445-160, Korea, Department of Chemical Engineering, University of Texas, Austin, Texas 78712, United States.
  12. Ankit K. Shah, MarkanaAnilkumar and Nishant Parikh, ” Performance analysis of IMC based PID controller tuning on approximated process model”, Nirma University Journal of engineering and technology
  13. SigurdSkogestad_ , “Probably the best simple PID tuning rules in the world”, Department of Chemical Engineering, Norwegian University of Science and Technology, N–7491 Trondheim Norway
  14. Ibrahim Kaya, “IMC based automatic tuning method for PID controllersin a Smith predictor configuration”, Department of Electrical and Electronics Engineering, Faculty of Engineering, Inonu University, 44069 Malatya, Turkey.
  15. Rames C Panda, “Synthesis of PID Controller for unstable and integrating process”, Department of Chemical Engineering, CLRI(CSIR), Adyar, Chennai 600020, India.
  16. Shamsuzzoha and Moonyong Lee (2012). IMC Filter Design for PID Controller Tuning of Time Delayed Processes, PID Controller Design Approaches - Theory, Tuning and Application to Frontier Areas, Dr.MarialenaVagia (Ed.), ISBN: 978-953-51-0405-6
  17. Horn I. G, Arulandu J. R, Christopher J. G, Van Antwerp J.G and Braatz R.D, (1996), “Improved Filter Design in Internal Model Control”, Ind. Eng. Chem. Res, Vol.35, pp.3437-3449
  18. Skogestad S, Grimholt C, ”The SIMC method for smooth PID controller [C]// PID Control in the Third Millennium, Advances in Industrial Control”, Springer, 2012
  19. Ian G. Horn, Jeffery R. Arulandu, Christopher J. Gombas, Jeremy G. VanAntwerp, and Richard D. Braatz, “Improved Filter Design in Internal Model Control”, Department of Chemical Engineering, University of Illinois at UrbanasChampaign, 600 South Mathews Avenue, Box C-3, Urbana, Illinois 61801-3792.
 
  1. Parada, D. Sbarbaro, R. A. Borges & P. L. D. Peres , “Robust PI and PID design for first- and secondorder processes with zeros, time-delay and structured uncertainties”
  2. Ruscio D. D, (2010), “On Tuning PI Controllers for Integrating PlusTime Delay Systems, Modelling, Identification and Control”, Vol.31, pp.145?
  3. Seborg D. E, Edgar T. F, Mellichamp D. A, Doyle F. J, (2010), “Process Dynamics and Control”, 3rded, John Wiley & Sons: New York.
  4. Grimholt C, Skogestad S, (2012), “Presented optimal PI-control and verification of the SIMC Tuning Rule”, IFAC conference on advances in (PID’12), Brescia, Italy.
     

How to Cite This Article

Manju Sharmila.N, MonishaSrihari and Nivethitha Devi .M. (2017); COMPARATIVE STUDY ON TUNING METHODSFOR SISO SYSTEM., Int. J. of Adv. Res., 5 (03), 1381-1390, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/3645

Corresponding Author

Monisha Srihari
St. joseph's college of engineering
Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.