Vol. 5 (07) pp. 820-824 DOI: 10.21474/IJAR01/4785

MICROMECHANICAL ANALYSIS OF HYBRID COMPOSITES.

and
  • Associate Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology & Management, Bangalore, India.
  • Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology & Management, Bangalore, India.
13 Downloads 135 Views
Crossref

Download Full Paper (PDF)

Abstract

The prediction of elastic modulus of the Kevlar/Glass hybrid composites had been investigated through Rule of hybrid mixtures (RoHM) equation. Hybrid composition were studied with different fiber percentage and the relative glass fiber contents were varied up to 100 %. The experimental and predicted values were evaluated and found excellent agreement with each other.

Keywords

How to Cite This Article

M. N Gururaja and A. S Devaraja. (2017); MICROMECHANICAL ANALYSIS OF HYBRID COMPOSITES., International Journal of Advanced Research (IJAR), 5 (07), 820-824, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/4785

Corresponding Author

M.N Gururaja
Associate Professor, Department of Mechanical Engineering, Dayanandasagar Academy of Technology& Management, Bangalore, India

Article Analytics

References

  1. Yamada, H. Sasabe, Y. Osada and Y. Shiroda, I. Concepts of Hybrid Materials, Hybrid Materials ?Concept and Case Studies, ASM International, OH, USA, 1989
  2. Mechanical Engineers Handbook, John Wiley and sons Inc., Hoboken, 2000, Third edition, New Jersey.
  3. Yao and Wenbin Li ,Tensile, impact and dielectric properties of three dimensional orthogonal aramid/glass fiber hybrid composites, Journal of Material Science Vol? 42, 2007, pp 6494?6500
  4. Mehmood, and Raza, Hybridization effect of glass and carbon fiber on mechanical properties of epoxy based composites, Vol 32, 2010, pp 101-105.
  5. Taketa and Babu, Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene Composites, Journal of Material Science Part A 41, 2010 pp 927?932.
  6. Woven fabric Micromechanics WFM Technomic, Lancaster PA, 1991.
  7. MIKROLAM Stellbrink, K, Drosselweg 7, D-71126 Gaufelden, 1993.
  8. F. Ashby, and Y.J.M. Brechet, Acta Materialia 51 , 2003, 5801
  9. K. Mallick, ?Fiber-Reinforced Composites:Materials, Manufacturing, and Design, Third Edition?, CRC Press, Boca Raton , 2007
  10. Agarwal B.D., Broutman L.J., Analysis and Performance of Fiber Composites, John Wiley, New York, Ch.1, 1980.
  11. Jamal Mirbagheri, Mehdi Tajvidi, and John C. Hermanson, Prediction of the Elastic Modulus of Wood Flour/Kenaf Fibre/Polypropylene Hybrid Composites, Iranian Polymer Journal 16 (4), 2007, 271-278
  12. R. Mansor, S. M. Sapuan, and E. S. Zainudin, Stiffness Prediction of Hybrid Kenaf/Glass Fiber Reinforced Polypropylene Composites using Rule of Mixtures (ROM) and Rule of Hybrid Mixtures (RoHM), J. Polym. Mater. Vol. 30, No. 3, 2013, 321-334
  13. Y. Fu, G. Xu, and Y.W. Mai, Journal of Composite materials. Part B 33, 2002, 291

Similar Articles

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.