AN ASSESSMENT OF MULTI-PLATE SCREW PRESS IN DEWATERING PROCESS OF SLUDGE TREATMENT (the best option?).
- UNEP- TONGJI Institute of Environment for Sustainable Development, College of Environmental Science and Engineering, Tongji University, Shanghai.
- UNEP-TONGJI Institute of Environment for Sustainable Development, College of Environmental Sciences and Engineering, State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, Shanghai, P. R.China.
- UNEP- TONGJI Institute of Environment for Sustainable Development, College of Environmental Science and Engineering, Tongji University, Shanghai.
- UNEP- TONGJI Institute of Environment for Sustainable Development, College of Environmental Science and Engineering, Tongji University, Shanghai.
- Abstract
- Keywords
- References
- Cite This Article as
- Corresponding Author
Sludge dewatering is a crucial step in sludge treatment because it determines the amount of and quality of sludge produced. There are many mechanical methods of dewatering sludge. The paper aims at analyzing three major methods based on principle of operation and possible optimization techniques then compares it to multi-plate screw press which is being adapted as a model that aims at solving problems that arise from usage of the fore mentioned equipment while clearly offering energy efficient solutions. Ultimately the question of the best option can be answered after carefully analyzing available literature on other used equipment. The development of Multi-plate Screw Press which is adaptable to deal with sludge from a variety of industries such as petro chemistry, petrochemical chemical fiber, paper-making, pharmaceuticals, leather, food and beverage etc. It is easy to operate and more power efficient. It utilizes the principles of dewatering force-water homo-direction and thin-layer dewatering. The machine allows automatic continuous operation of sludge flocculation thickening dewatering and filtrate discharging. It is equipped with moving rings that are self-cleaning it utilizes very little power as it relies on a low inner pressure of the filter chamber. Moreover the problem of noise pollution is eradicated as well as space as this technology can be connected directly to the aeration tank or the secondary sedimentation tank.
- Bor?ň, J., Houdkov?, L., & Els??er, T. (2010). Processing of sewage sludge: Dependence of sludge dewatering efficiency on amount of flocculant. Resources, Conservation and Recycling, 54(5), 278?282. https://doi.org/10.1016/j.resconrec.2009.08.010
- Bourioug, M., Alaoui-Sehmer, L., Laffray, X., Benbrahim, M., Aleya, L., & Alaoui-Soss?, B. (2015). Sewage sludge fertilization in larch seedlings: Effects on trace metal accumulation and growth performance. Ecological Engineering, 77, 216?224. https://doi.org/10.1016/j.ecoleng.2015.01.031
- Floerger, S. (2003). Sludge Dewatering, 35. https://doi.org/10.2524/jtappij.60.1698
- Impact of water pollution on Nairobi river, Kenya. (n.d.).
- Kamami, M. I. (2011). Fuzzy Based Decision Support Method for Selection of Sustainable Wastewater Treatment Technologies.
- Mahmoud, A., Hoadley, A. F. A., Conrardy, J. B., Olivier, J., & Vaxelaire, J. (2016). Influence of process operating parameters on dryness level and energy saving during wastewater sludge electro-dewatering. Water Research, 103, 109?123. https://doi.org/10.1016/j.watres.2016.07.016
- Mech Dewater. (n.d.).
- Okada, T. (n.d.). New Screw Press Sludge Dewatering Equipment Reduction of Sludge Moisture Content with a Minimum of Operator Maintenance.
- Jerry A. Nathanson, MS, PE, Richard A. Schneider, MS, PE, Basic environmental technology: water supply, waste management, and pollution control/ Wisconsin.?Sixth edition
- Sparks, T. (2012). Understanding filter presses and belt filters. Filtration and Separation, 49(4), 20?24. https://doi.org/10.1016/S0015-1882(12)70193-3
- Technology, E., & Universit, O. (2016). The Prediction of Filter Belt Press Dewatering Efficiency for Activated Sludge By Experimentation on Filtration Compression ..., (March). https://doi.org/10.1080/09593332508618474
- United States Environmental Protection Agency.(USEPA 2000). General Information on Biosolids. Retrieved from Environmental Protection Agency. (n.d.). Retrieved from https://www.epa.gov/biosolids
- Wakeman, R. J. (2007). Separation technologies for sludge dewatering. Journal of Hazardous Materials, 144(3), 614?619. https://doi.org/10.1016/j.jhazmat.2007.01.084
- Warman, P. R., & Termeer, W. C. (2005). Evaluation of sewage sludge, septic waste and sludge compost applications to corn and forage: Yields and N, P and K content of crops and soils. Bioresource Technology, 96(8), 955?961. https://doi.org/10.1016/j.biortech.2004.08.003
- United States Environmental Protection Agency. (USEPA 2000). General Information on Biosolids. Retrieved from Environmental Protection Agency www.epa.gov/owm/mtb/bosolids/genqa.htm.
[Anne Wambui Mumbi, Li Fengting, Fridah Mwarania and Batzorig Uuganchimeg. (2017); AN ASSESSMENT OF MULTI-PLATE SCREW PRESS IN DEWATERING PROCESS OF SLUDGE TREATMENT (the best option?). Int. J. of Adv. Res. 5 (Dec). 740-747] (ISSN 2320-5407). www.journalijar.com
1. UNEP- TONGJI Institute of Environment for Sustainable Development, College of Environmental Science and Engineering, Tongji University, Shanghai.