Vol. 6 (10) pp. 1446-1460 DOI: 10.21474/IJAR01/7955

THERMO-MECHANICAL PROPERTIES OF HIGH-PERFORMANCE NATURAL POZZOLAN CONCRETE.

, and
  • Materials Science and Metallurgy, EcoleSup?rieurePolytechnique, University of Antananarivo, 101 Antananarivo, Madagascar.
  • Faculty of Agriculture, Ryukyu University, 1 Senbaru, Nishihara, Okinawa 903-0213, Japan.
  • INGE, Planning and Territory, University of Antananarivo, 101 Antananarivo, Madagascar.
10 Downloads 95 Views
Crossref

Download Full Paper (PDF)

Abstract

Researches and obtainable results on natural pozzolan particles, to make lightweight concretes, are proven to be very rare. This work has been conducted in the thermo-mechanical properties of the natural pozzolans in lightweight concrete. The use of lightweight concrete has allowed us to expand the field of use of concrete. The goal of this work is to achieve a high-performance lightweight concrete at a competitive cost and minimal environmental impact with natural pozzolans.

Keywords

How to Cite This Article

Eddie Franck Rajaonarison1, Bam HajaNirina Razafindrabe and Lalaina Dina Prisca Rajaonarison. (2018); THERMO-MECHANICAL PROPERTIES OF HIGH-PERFORMANCE NATURAL POZZOLAN CONCRETE., International Journal of Advanced Research (IJAR), 6 (10), 1446-1460, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/7955

Corresponding Author

RAJAONARISON Eddie Franck
Professor at the University

Article Analytics

References

  1. Lorenza, C., Stefania, M., & Chiara, B. (2016). Superplasticizer Addition to Carbon Fly Ash Geopolymers Activated at Room Temperature. Materials, 9(7): 586. doi: [3390/ma9070586].
  2. Roshan, T., &Mishara, S.P. (2013). Experimental Studies on Property of Concrete due to Different Ingredient based Super Plasticizer. International Journal of Science, Engineering and Technology Research, 2(5), 2278 ?7798.
  3. Khudhair, M.H., Elharfi, A., &Salahdine, M.EY. (2018). The Effect of Polymeric Admixtures of Water Reduce of Superplasticizer and Setting Accelerator on Physical Properties and Mechanical Performance of Mortars and Concretes. Journal of Environmental Research, 1(4).
  4. Karumanchi, M., Avula, G., Regulagunta, M., &Vipparla, V.B. (2018). Design of high strength concrete-m100 by using silica fume and super plasticizers. Laetsd journal for advanced research in applied sciences, 5(7), 394-8442. http://iaetsdjaras.org/
  5. , Wihadi, M.T., Zulharnah., &Ulva, R.I. (2015). Porosity, pore size and compressive strength of self compacting concrete using sea water. Procedia Engineering, Elsevier, (25)?832-837.doi: 10.1016/j.proeng.2015.11.045.
  6. Bu, J., &Tian, Z. (2016). Relationship between pore structure and compressive strength of concrete: Experiments and statistical modeling. Indian Academy of Sciences, Sadhana 3 (41), pp. 337?344.
  7. ASTM C150 (2009). Standard specification for Portland cement. 10 pp. doi:10.1520/C0150_C0150M-09.
  8. ASTM C1602 (2009). Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete.
  9. ASTM C 618 (2001). Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete, ASTM C618-00, Annual Book ASTM Standard 04.02, 310-313.
  10. NF EN 934-2 (2009). Admixtures For ConcreteMortar And Grout.
  11. Noufid, A., &Belattar, S. (2018). Use of Fillers for Optimal Formulation of Self-Compacting Concretes. Civil Engineering Journal 4(1):67, doi: 10.28991/cej-030969.
  12. Yousfi, S., Nouri, L., Messaoud, S., &Hadjab, h. (2013). The use of the dreux-gorisse method in the preparation of concrete mixes: An automatic approach. Asian Journal of Civil Engineering 15(1):79-94.
  13. Nguyen, N.H., anne-lise, B., Ortola, S., & Albert, N. (2013). Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete.  Construction and Building Materials, 51:121?132, doi: 10.1016/j.conbuildmat.2013.11.019.
  14. Ramachandran, V.S., Beaudoin, J.J., &Shihua, Z. (1989). Control of slump loss in superplasticized concrete. Materials and Structures 22(2), doi: 1007/BF02472281.
  15. ASTM C 33-03 (2003). Standard specifications for concrete aggregates.
  16. ASTM C39 / C39M ? 18. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
  17. Bessenouci, M.Z., Triki, N.E.B., Khelladi, S., Draoui, B., &Abene, A. (2011). The apparent thermal conductivity of pozzolana concrete. Seventh International Conference on Material Sciences (CSM7), Beirut?Lebanon. Elsevier- Physics Procedia 21, 59?66.

Similar Articles

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.