SOLID WASTE MANAGEMENT: ITS SOURCES, COLLECTION, TRANSPORTATION AND RECYCLING.
- Research Scholar, Department of Economics,Thiru.Vi.Ka.Govt. Arts College,Tiruvarur.
- Assistant Professor, Department Of Economics, Presidency College, Chennai.
- Abstract
- Keywords
- References
- Cite This Article as
- Corresponding Author
Solid wastes may be defined as useless, unused, unwanted, or discarded material available in solid form. Semisolid food wastes and municipal sludge may also be included in municipal solid waste. The subject of solid wastes came to the national limelight after the passage of the solid waste disposal act of 1965. Today, solid waste is accepted as a major problem of our society. In the United States over 180 million tons of municipal solid waste (MSW) was generated in 1988. At this generation quantity, the average resident of an urban community is responsible for more than 1.8 kg (4.0 lbs.) of solid waste per day. This quantity does not include industrial, mining, agricultural, and animal wastes generated in the country each year. If these quantities are added, the solid waste production rate reaches 45 kg per capita per day (100 lb. /c.d.). To introduce the reader to the solid waste management field, an overview of municipal solid waste problems, sources, collection, resource recovery, and disposal methods are presented in this paper. Greater emphasis has been given to the design and operation of municipal sanitary landfills, regulations governing land disposal, and leachate generation, containment and treatment methods.
- S. Environmental Protection Agency, ?Characterization of municipal solid waste in the United States,? Solid Waste and Emergency Response, Washington D.C., 1990.
- S. Environmental Protection Agency, ?Characterization of municipal solid waste in the United States,? Final Report Prepared by Franklin Associates, Inc, 1988.
- A. Vesilind, J. J. Pierce, and R. F. Weiner, Environmental Engineering, 2nd ed. Boston, MA: Butterworth's, 1988.
- S. Environmental Protection Agency, ?Decision-Makers guide in solid waste management,? SW-500, Washington D.C.: U.S. Government Printing Office, 1976.
- S. Congress, ?Facing America's trash: What next for municipal solid waste,? OTA-0-424, Office of Technology Assessment, Washington D.C.: U.S. Government Printing Office, 1989.
- Woods, ?Refuse vehicles of the ?90s,? Waste Age, vol. 23, no. 5, 38-44, 1992.
- A. Shuster and D. A. Schur, ?Heuristic routing for solid waste collection vehicles,? SW-11, U.S. Environmental Protection Agency, 1974.
- Matrecon, ?Lining of waste impoundment and disposal facilities,? SW-870, U.S. Environmental Protection Agency, Cincinnati, OH, 1980.
- L. Davis and D. A. Cornwell, Introduction to Environmental Engineering, 2nd ed. New York: MacGraw-Hills, Inc, 1991.
- Tchobanoglous, H. Theisen, and S. Vigil, ?Integrated solid waste management,? Engineering Principles and Management Issues, New York: McGraw Hill, 1993.
- [11] D. C. Wilson, Waste Management: Planning, Evaluation Technologies, Oxford: Clarendon Press, 1981.
- L. Drobny, H. E. Hull, and R. F. Testin, ?Recovery and utilization of municipal solid waste,? EPA- SW-10C-71, U.S. Environmental Protection Agency, Office of Solid Waste Management Program, Washington D.C. (NTIS No. PB-204 922), 1971.
- A. Vesilind and A. E. Rimer, Unit Operations in Response Recovery Engineering, Englewood Cliffs, NJ: Prentice Hall, Inc, 1981.
- V. L. Kiser, ?Municipal waste combustion in North America,? Waste Age, vol. 23, no. 11, pp. 26-34, 1992.
[V.Nathiya and V.Thandapani. (2019); SOLID WASTE MANAGEMENT: ITS SOURCES, COLLECTION, TRANSPORTATION AND RECYCLING. Int. J. of Adv. Res. 7 (Apr). 160-164] (ISSN 2320-5407). www.journalijar.com
Research Scholar, Department of Economics, Thiru.Vi.Ka.Govt. Arts College,Tiruvarur.