Vol. 7 (05) pp. 926-932 DOI: 10.21474/IJAR01/9116

MATERIAL SELECTION AND SOFTWARE SIMULATION OF DESIGNED PERMANENT MAGNET GENERATOR.

, , ,
  • Electrical Engineering Department, Gandhinagar Institute of Technology, Gandhinagar.
17 Downloads 70 Views
Crossref

Download Full Paper (PDF)

Abstract

This paper presents a study on material used for the proposed design of Permanent Magnet Synchronous Machine (PMSM) and the 2D (Two Dimensional) analysis of Magnetostatics analysis for the designed model in software. It is more important to consider material selection and analysis for the accountancy of loss in the permanent magnet synchronous machines as they are having higher power output density. It is also necessary that an EM (Electromagnetic) field analysis accounting for the temperature rise throughout the machine should be taken into account because the heat generation from these loss transfers to the inside of the machine?s structure causing changes in material properties, temperature rise in machine winding and finally an enormous impact on the machine characteristics.

Article Analytics

References

  1. IEEE paper on Influences of material degradation due to laser cutting on the operating behavior of PMSM using a continuous local material model by Silas Elfgen, Simon Steentjes, Stefan B?ohmer, David Franck, and Kay Hameyer.
  2. IJSR published paper on chemistry, properties and uses of nylon by Parth Vagholkar.
  3. IEEE published paper on Electromagnetic-Thermal Coupled Analysis Method for Interior PMSM by Jae-Bum Park, Morteza Moosavi, Hamid A. Toliyat.
  4. Oleg Lyan and Vincent Monet, Final Thesis on ?Research of permanent magnet generator with compensated reactance winding?.
  5. IEEE paper on Design, Fabrication and Analytical Investigations on a Permanent Magnet Synchronous Generator by Subhrakanti Nanda, Mainak Sengupta.
  6. Paitandi And M. Sengupta, Design, analysis of a PMSM and its comparative study With an Induction Machine of same nominal rating, NPEC, December 2013, IIT Kanpur.
  7. Article on Influence of Magnet Material Selection on the Design of Slow-Speed Permanent Magnet Synchronous Generators for Wind Applications in  Elektronika ir Elektrotechnika by Ants Kallaste, Toomas Vaimann and Anouar Belahcen.
  8. Paper on Optimum Design of a Three-Phase Permanent Magnet Synchronous Motor for industrial applications in International Journal of Applied Operational Research by M.J. Soleimani Keshayeh and S. Asghar Gholamian.

How to Cite This Article

Yash R. Khakhi, Jashank A. Dighe, Harshil P. Thaker, Raj R. Patel. (2019); MATERIAL SELECTION AND SOFTWARE SIMULATION OF DESIGNED PERMANENT MAGNET GENERATOR., Int. J. of Adv. Res., 7 (05), 926-932, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/9116

Corresponding Author

Yash R. Khakhi

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.