ANALYSIS OF DEEP GROOVE BALL BEARINGBASED ON STATIC, DYNAMIC AND FREQUENCY ANALYSIS USING ANSYS R3
- BE, Mechanical Department, Rajiv Gandhi Institute of Technology, India.
- Abstract
- Keywords
- References
- Cite This Article as
- Corresponding Author
Bearings are used in various mechanical applications. These applications include automobiles, aerospace, shipping industries, etc. Based on the type of application the bearings are subjected to various radial and axial loading which leads to the generation of stresses and vibrations in the bearing. Continuous stresses and vibration-induced inside the bearing affect the life of the bearings which in turn leads to failure of these bearings before expected life. In this paper, an effort has been made to select the type of bearing used for standard medium speed electric motor. The type of bearing used is deep groove ball bearing of type and size 6312. A three-dimensional model was created with the help of Solidworks Software. Further, the model was subjected to pure radial loading to carry out static, dynamic and vibration analysis using Ansys simulation software to check the life of bearing. Thus, the obtained results are compared with the analytical method.
- Erwin V. Zaretsky, Harold H. Coe & Richard August?(1997)?Effect of Hoop Stress on Ball BearingLifePrediction?,?Tribology Transactions,?40:1,?91-101,?DOI:?1080/10402009708983634
- Vimal Kumar Pal, Dr. Prabhat Kumar Sinha, Er. Nikhlesh N. Singh ?Modeling, simulation and stress Analysis of Integral Shaft Bearing Using Ansys Benchworks 14.0?? International Journal of Advance Research and Innovative Ideas in Education (IJARIIE) ISSN(O)-2395-4396,Vol-3 Issue-5, 2017
- Design Data Book, P. S. G. College of Technology, ISBN 978-81927355-0-4.
- Xiwei Zhou, Hua Xu, Xianzhi Xiong and Lin Wang, "Load distribution model of deep groove ball bearing with ball off size,"?2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), Xi'an, 2013, pp. 58-63. doi: 10.1109/ISAM.2013.6643488
- Malinowski and D. R. Snyder, "Selection of electric motor bearings for coupled & belted loads,"?Conference Record of 2005 Annual Pulp and Paper Industry Technical Conference, 2005., Jacksonville, FL, 2005, pp. 59-70. doi: 10.1109/PAPCON.2005.1502050
- Manoj K, Dr. S S Deshmukh, ?Prediction of Axial Loads and Life of Bearings of the Spindle System through ANSYS Programming Approach? International Conference on Emanations in Modern Technology and Engineering (ICEMTE-2017) ISSN: 2321-8169, Volume: 5 Issue: 3
- Erwin V. Zaretskyfellow stle, Joseph V. Poplawski member stle&Lawrence e. root member stle?(2007)?Reexamination of Ball-Race Conformity Effects on Ball Bearing Life,?Tribology Transactions,?50:3,?336-349,?DOI:?1080/10402000701429147.
[Ashutosh Bhalerao and Sumeet Mujumdar (2020); ANALYSIS OF DEEP GROOVE BALL BEARINGBASED ON STATIC, DYNAMIC AND FREQUENCY ANALYSIS USING ANSYS R3 Int. J. of Adv. Res. 8 (Jan). 1065-1072] (ISSN 2320-5407). www.journalijar.com
