16Apr 2020

ANALYSIS AND DESIGN OF A MULTI-STOREY BUILDING BY USING STAAD PRO: A REVIEW

  • Department of Civil Engineering, G H Raisoni College of Engineering & Management, Wagholi, Pune, Maharashtra, India, 412207.
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

A review of the analysis and design of a multi-storey building with STAAD Pro is carried out. Planning is done by using AutoCAD and load calculations were done manually and then the structure was analysed using STAAD Pro. The dead load, imposed load and wind load with load combination are calculated and applied to the structure. Overall, the concepts and procedures of designing the essential components of a multistory building are described. STAAD Pro software also gives a detailed value of shear force, bending moment and torsion of each element of the structure which is within IS code limits.


  1. Indian Standard 456-2000 - Plain and Reinforced Concrete - Code of Practice (Fourth Revision)
  2. Indian Standard 800-2007 - Indian Standard Code of Practice for General Construction in Steel
  3. Indian Standard 875 (Part 1) - 1987: Dead Loads
  4. Indian Standard 875 (Part 2) - 1987: Imposed Loads
  5. Indian Standard 875 (Part 3) - 1987: Wind Load
  6. D. Bhosale, M. Archit, Pradip Hatkhambkar, Rupesh Vinayakm Katkar, Shubham Balasaheb Babar and Sunny Pramod Gorivale (2018): Analysis and Design of Multi-Storey Building by using STAAD-Pro, International Journal of Innovative Science and Research Technology: 2456-2165, Vol.3 Issue 4, pp: 148-150.
  7. Sivaji, N. Madhava Reddy and T. Yeshwanth Kumar (2019): Analysis & design of multi-story building using STAAD Pro and e-tabs, International Journal of Management, Technology and Engineering: 2249-7455, Vol.9 Issue 1, pp: 2124-2134.
  8. Akil Ahmed, Saddam Husain, Mohd Jenul, Md. Hashim Ali, Mohd Akbar Hayat, Mohd. Arshun and Mohd, Junaid Malik (2015): Comparative Study on Structural Analysis and Design of a RCC Building Frame, Journal of Civil Engineering and Environmental Technology: 2349-8404, Vol.2 Issue 10, pp: 66-71.
  9. Aman, Manjunath Nalwadgi, T. Vishal and Gajendra (2016): Analysis and design of multi-storey building by using STAAD Pro, International Research Journal of Engineering and Technology: 2395-0072, Vol.3 Issue 6, pp: 887-891.
  10. Amar Hugar, Sharanabasappa M. Pujari, Beerappa G. Pujari, Anaveerappa N. Biradar and Gajendra (2016): Analysis and Design of a Commercial cum Residential Building by Using STAAD Pro, International Research Journal of Engineering and Technology: 2395-0072, Vol.3 Issue 6, pp: 893-898.
  11. Anoop, Fousiya Hussian, R. Neeraja, Rahul Chandran, S. Shabina and S. Varsha (2016): Planning analysis and design of multi storied building by STAAD Pro, International Journal of Scientific & Engineering Research: 2229-5518, Vol.7 Issue 4, pp: 01-04.
  12. Gireesh Babu (2017): Seismic Analysis and Design of G+7 Residential Building Using STAAD PRO, International Journal of Advance Research, Ideas and Innovations in Technology:? 2454-132, Vol.3 Issue 3, pp: 924-930.
  13. Babitha rani and H. Nagendra Babu (2018): Analysis and Design of G + 4 Building Using STAAD Pro, International Journal of Innovative Research in Technology: 2349-6002, Vol.4 Issue 10, pp: 210-219.
  14. Bandipati Anup and Dr. Dumpa Venkateswarlu (2016): Comparison between manual analysis and STAAD Pro Analysis of multi storey building, International Journal of Research Sciences and Advanced Engineering: 2319-6106, Vol.2 Issue 15, pp: 216-242.
  15. Borugadda Raju and Mr. R. Rattaiah (2015): Analysis and design of high-rise building (G+30) using STAAD Pro, International Journal of Research Sciences and Advanced Engineering: 2319-6106, Vol.2 Issue 12, pp: 50-54.
  16. R. Deshmukh, A.K. Yadav, S.N. Supekar, A. B. Thakur, H.P. Sonawane and I.M. Jain (2016): Analysis and Design of G+19 Storied Building Using STAAD-Pro, International Journal of Engineering Research and Application: 2248-9622, Vol.6 Issue 7, pp: 17-19.
  17. Deevi Krishna Chaitanya and A. L. Santhosh Kumar (2017): Analysis and design of a (G + 6) multi storey residential building using STAAD Pro, Anveshana?s International Journal of Research in Engineering and Applied Sciences:? 2455-6300, Vol.2 Issue 1, pp: 108-112.
  18. Denali Lakshmi Anuja and V.S. Nagasai (2019): Planning Analysis and Design of Residential Building (G+5) By using STAAD Pro, International Journal of Engineering Development and Research: 2321-9939, Vol.7 Issue 3, pp: 7-14.
  19. Dhanavath Seva, Bhukya Chandrashekar and Faria Aseem (2017): Design of Residential Building using STAAD Pro, International Journal of Engineering Science and Computing: Vol.7 Issue 11, pp: 15584-15594.
  20. Dharane Sidramappa Shivashaankar (2014): Design and practical limitations in earthquake resistant structures and feedback, International Journal of Civil Engineering and Technology: 0976?6308, Vol.5 Issue 6, pp: 89-93.
  21. Dinesh Ranjan S. and Aishwarya Lakshmi V. (2017): Design and Analysis of an Institutional Building, International Digital Library: Vol.1 Issue 2, pp: 490-491.
  22. Falak Vats (2019): Review paper on design and analysis of multi-storey building by the use of STAAD Pro, International Journal of Advance Research, Ideas and Innovations in Technology: 2454-132X, Vol.5 Issue 3, pp: 327-328.
  23. Mohan, C. Selin Ravikumar, T.S. Thandava Moorthy (2017): Using STAAD Pro: Building Design and Analysis, International Journal of Advanced Information Science and Technology: 2319:2682, Vol.6 Issue 6, pp: 128-133.
  24. Prabin Kumar and Gopi Bala Vinay (2018): Design and analysis of G+8 commercial building using STAAD Pro, International Journal of Pure and Applied Mathematics: 1314-3395, Vol.119 Issue 17, pp: 2981-2988.
  25. Prabin Kumar and M. Malyadri (2018): Seismic analysis and design of G+15 multi-storey residential building-a review, International Journal of Pure and Applied Mathematics: 1314-3395, Vol.119 Issue 17, pp: 211-216.
  26. Prabin Kumar and R. Sanjaynath (2018): A study on design of multi-storey residential building - a review, International Journal of Pure and Applied Mathematics: 1314-3395, Vol.119 Issue 17, pp: 2797-2802.
  27. Rama Raju, M.I. Shereef, Nagesh R. Iyer and S. Gopalakrishnan (2013): Analysis of tall building subjected to wind and seismic loads, Emerging Technologies in civil engineering: pp: 103-111.
  28. Mallikarjun and Dr. P. V. Surya Prakash (2016): Analysis and Design of a Multi Storied Residential Building Of (Ung-2+G+10) By Using Most Economical Column Method, International Journal of Science Engineering and Advance Technology: 2321-6905, Vol.4 Issue 2, pp: 151-158.
  29. Siva Nagakanya, A. Meghana Reddy, A. Pujitha and M. Dheeraj (2018): Design and Analysis of RCC Framed Structure (G+5) by using STAAD.Pro and STAAD.etc, International Research Journal of Engineering and Technology: 2395-0056, Vol.6 Issue 3, pp: 235-237.
  30. Madhurivassavai, V. Bhargavi, E.V. Raghava Rao (2016): Analysis and Design of Multistoried Building with G+8 Floors by Using STAAD Pro, International Journal of Advanced Technology and Innovative Research:? 2348?2370, Vol.8 Issue 2, pp: 0225-0230.
  31. Mahesh N. Patil and Yogesh N. Sonawane (2015): Seismic Analysis of Multi-storied Building, International Journal of Engineering and Innovative Technology: 2277-3754, Vol.4 Issue 9, pp: 123-130.
  32. Mohammed Ghias Uddin, Salman Shareef and Waseem Sohail (2018): Analysis and Design of Multi -Storey Commercial Building by using STAAD Pro and Comparing It with Two Seismic Zones, International Journal for Scientific Research & Development: 2321-0613, Vol.6 Issue 5, pp: 174-177.
  33. Mohit Sharma and Dr. Savita Maru (2014): Dynamic Analysis of Multistoried Regular Building, IOSR Journal of Mechanical and Civil Engineering: 2278-1684, Vol.11 Issue 1, pp: 37-42.
  34. M. Khan (2016): Analysis and Design of Apartment Building, International Journal of Innovative Science, Engineering & Technology: 2348-7968, Vol.3 Issue 3, pp: 525-555.
  35. Prashanth, S. Anshuman, Pandey and R. K. Arpan Herbert (2012): Comparison of design results of a Structure designed using STAAD Pro and ETABS Software, International Journal of Civil and Structural Engineering: 0976 ? 4399, Vol.2 Issue 3, pp: 869-875.
  36. D. Deshpande, Manoj. N. Pai, N. Pawan and Aashish P. Pednekar (2017): Analysis, design and estimation of basement+G+2 residential building, International Research Journal of Engineering and Technology:? 2395-0072, Vol.4 Issue 6, pp: 2074-2087.
  37. Sanjaynath and K. Prabin Kumar (2018): Planning, analysis and design of (G+20) multi-storey residential building using STAAD Pro, International Journal of Pure and Applied Mathematics: 314-3395, Vol.119 Issue 17, pp: 139-145.
  38. K. Saleem and B. Ravi Kumar (2017): Analysis and design of multi-storyed building by using STAAD Pro, Anveshana?s International Journal of Research in Engineering and Applied Sciences:? 2455-6300, Vol.2 Issue 1, pp: 121-126.
  39. Sudheer (2017): Analysis and design of G+5 residential building using STAAD Pro, Global Journal for Research Analysis:? 2277-8160, Vol.6 Issue 5, pp: 01-06.
  40. S. Patil, S.A. Ghadge, C.G. Konapure and C.A. Ghadge (2013): Seismic Analysis of High-Rise Building by Response Spectrum Method, International Journal of Computational Engineering Research: 2250-3005, Vol.3 Issue 3, pp: 272-279.
  41. Samiksha Kumbhare, Riya Badole, Vikas Mate, Sahil Pathan, Runal Pawar, Umesh Shende and Prof. Komal Meshram (2019): Seismic Analysis of Multi-storey (G+7) Building using STAAD-Pro and Manually, International Journal for Research in Applied Science & Engineering Technology: 2321-9653, Vol.7 Issue 4, pp: 1287-1297.
  42. Sreeshna K.S. (2016): Analysis and Design of an Apartment building, International Journal of Innovative Science, Engineering & Technology: 2348?7968, Vol.3 Issue 3, pp: 456-479.
  43. Dinesh Kumar, Mohammed Ibrahim, Mohammed Ismail Pasha Quadri, Mohammed Sohail Ali, Syed Abdul Rahman and Mohammed Akbar Khan (2019): Design and Analysis of High-Rise Building using STAAD Pro, SSRG International Journal of Civil Engineering: 2348?8352, Vol.6 Issue 6, pp: 788-793.
  44. Tejashree Kulkarni, Sachin Kulkarni, Anjum Algur, M. H. Kolhar (2016): Analysis and design of high-rise building frame using STAAD Pro, International Journal of Research in Engineering and Technology: 2321-7308, Vol.5 Issue 4, pp: 235-237.
  45. Varalakshmi, G. Shiva Kumar, R. Sunil Sarma (2014): Analysis and Design of G+5 Residential Building, IOSR Journal of Mechanical and Civil Engineering: 2278-1684, 2014, pp: 73-77.
  46. Vikrant Trivedi and Sumit Pahwa (2018): Wind Analysis and Design of G+11 Storied Building Using STAAD-Pro, International Research Journal of Engineering and Technology: 2395-0072, Vol.5 Issue 3, pp: 205-209.

[Adhiraj A. Wadekar and Ajay G. Dahake (2020); ANALYSIS AND DESIGN OF A MULTI-STOREY BUILDING BY USING STAAD PRO: A REVIEW Int. J. of Adv. Res. 8 (Apr). 67-76] (ISSN 2320-5407). www.journalijar.com


Ajay G. Dahake
G H Raisoni College of Engineering & Management, Wagholi, Pune

DOI:


Article DOI: 10.21474/IJAR01/10746      
DOI URL: http://dx.doi.org/10.21474/IJAR01/10746