NEW METHOD OF SIZING A FILTER (RL-C) FOR AN INVERTER WITH SPWM CONTROL IN MEDIUM VOLTAGE ALTERNATING
- Institut National Polytechnique Felix Houphouet Boigny (INP-HB), Yamoussoukro, Cote dIvoire.
- Ecole Superieure Africaine des Technologies dInformation et de Communication (ESATIC), Abidjan, Cote dIvoire.
- Universite Virtuelle de Cote dIvoire (UVCI), Abidjan, Cote dIvoire.
- Abstract
- Keywords
- Cite This Article as
- Corresponding Author
The need to use SPWM controlled voltage inverters in MV, led us to examine how to filter alternative signals with filters (L-C) and (RL-C). This allowed us to decide on the use of certain formulas for calculating the elements of these filters. Likewise, we have proposed a method of calculating the resistance R by mathematical iterations without using the quality factor Q, in order to obtain a low error rate between the RMS values and the fundamental effective values and THDs respecting the standard 519 IEEE - 2014. The results of these studies obtained using the MATLAB-SIMULINK software are presented in the penultimate session of this article.
Nomenclature
SPWM Sinusoidal Pulse-Width-Modulation
THD Total Harmonic distortion
SN Apparent power of the alternating load
MV Medium voltage alternating voltage (1 kV --- 50 kV)
Uph phase-to-phase voltage at the ac load
RMS Root Mean Squared
R L C Resistance Inductance Capacitor
MVDC Medium voltage direct current
VSI Voltage Source Inverter
[K. Fernand Koffi, Agoua Raoule, Diety Landry, Georges Loum and Olivier Asseu (2021); NEW METHOD OF SIZING A FILTER (RL-C) FOR AN INVERTER WITH SPWM CONTROL IN MEDIUM VOLTAGE ALTERNATING Int. J. of Adv. Res. 9 (Apr). 34-43] (ISSN 2320-5407). www.journalijar.com
INPHB
Cote d