INFLUENCE OF WARM ROLLING AND RECRYSTALLIZATION ANNEALING ON MECHANICAL AND METALLOGRAPHIC PROPERTIES OF THE SUPERALLOY N07080
- Assistant Professor, University of Zenica - Institute Kemal Kapetanovic in Zenica.
- Researcher, University of Zenica - Institute Kemal Kapetanovic in Zenica.
Abstract
Additional strengthening of superalloy N07080 described in this work was achieved by warm rolling. Control of the ratio of strength and ductile properties of the superalloy is possible by appropriate selection of the amount of warm deformation and the appropriate selection of the partial recrystallization temperature. In addition, recrystallization annealing makes it possible to equalize the grain size across the cross section of the warm rolled bars, which before recrystallization differ significantly in size in the central and peripheral parts of the bars.
Keywords
How to Cite This Article
Omer Beganovic, Belma Fakic and Branka Muminovic (2021); INFLUENCE OF WARM ROLLING AND RECRYSTALLIZATION ANNEALING ON MECHANICAL AND METALLOGRAPHIC PROPERTIES OF THE SUPERALLOY N07080, International Journal of Advanced Research (IJAR), 9 (10), 680-689, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/13594
Corresponding Author
Article Analytics
Similar Articles
This work is licensed under a Creative Commons Attribution 4.0 International License.