Vol. 11 (11) pp. 118-125 DOI: 10.21474/IJAR01/17808

OPTIMIZATION DESIGN OF INLET AND OUTLET FOR A TURBINE POWER GENERATION EQUIPMENT

and
  • Shenyang Ligong University School of Mechanical Engineering, Shenyang, Liaoning 110159, China.
16 Downloads 61 Views
Crossref

Download Full Paper (PDF)

Abstract

To enhance the operational efficiency of turbine generators, this study takes the air intake structure of the U.S. military turbine fuzes and a self-designed structure as research subjects. By employing the numerical simulation software Fluent, we compared the turbines efficiency under various structural parameters. The results indicate that the U.S. militarys intake structure is not suitable for long intake duct types the turbines efficiency peaks when the diameter at the end of the intake duct is approximately 1.5 times that of the turbines radius. Future improvements in efficiency could be achieved by adjusting the dimensions and the matching relationship between the turbine, the intake duct, and the internal flow field.

Keywords

Article Analytics

How to Cite This Article

Wenxin Yang and Qilin Shu (2023); OPTIMIZATION DESIGN OF INLET AND OUTLET FOR A TURBINE POWER GENERATION EQUIPMENT, Int. J. of Adv. Res., 11 (11), 118-125, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/17808

Corresponding Author

Wenxin Yang

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.