Vol. 13 (02) pp. 351-356 DOI: 10.21474/IJAR01/20384

EXPERIMENTAL VALIDATION OF AN ELECTROMAGNETIC JET AT THE OUTPUT OF A RECTANGULAR WAVEGUIDE

, , , and
  • National Institut of Sciences and Technologies of Abeche, Chad.
  • University of NDjamena, Chad.
  • University of Jean Monnet Saint-Etienne, CNRS, Institut dOptique Graduate School, Laboratoire Hubert Curien UMR 5516, F-42023, Saint-Etienne, France.
12 Downloads 68 Views
Crossref

Download Full Paper (PDF)

Abstract

This study explores the generation of electromagnetic jets using a PTFE-loaded rectangular waveguide with an optimally designed tip. Due to the complexity of the structure, an optimization study was conducted to enhance computational efficiency while ensuring accuracy. Two prototypes were fabricated and experimentally tested, with key measurement challenges successfully addressed. The results demonstrate that a PTFE-loaded waveguide can effectively generate an electromagnetic jet, paving the way for potential applications in high-resolution imaging, beam shaping, and advanced electromagnetic wave control.

Keywords

How to Cite This Article

A. Deubaibe, M. Podda Abouna, Y. Dagal Dari, B. Mahamout Mahamat and B. Sauviac (2025); EXPERIMENTAL VALIDATION OF AN ELECTROMAGNETIC JET AT THE OUTPUT OF A RECTANGULAR WAVEGUIDE, Int. J. of Adv. Res., 13 (02), 351-356, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/20384

Corresponding Author

Antoine DEUBAIBE
National Institut of Sciences and Technologies of Abeche, Chad
Chad

Article Analytics

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.