MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF 17-7PH STEEL WITH MODIFIED CHEMICAL COMPOSITION AFTER NATURAL AGING
- University of Zenica, Institute Kemal Kapetanovic of Zenica.
Abstract
Modification of the contents of alloying elements with a narrower interval of Cr, Ni and Al can be obtained austenitic-martensitic steel 17-7PH which by, a subsequent heat treatment, can have values of mechanical and chemical properties required for components of automotive engine. Studies have confirmed that the rod dimensions 16mm made of steel 17-7PH with modified content of chromium, nickel and aluminum in combination with heat treatment solution annealing and precipitation hardening, gave values of mechanical properties, satisfying the requirements for steel with standard chemical composition.After aging was obtained martensitic austenitic microstru-cture, with a high percentage of martensite with a slight presence of delta ferrite.
Keywords
How to Cite This Article
Belma Fakic, Omer Beganovic, Mujagic Dervis and Edib Horoz (2026); MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF 17-7PH STEEL WITH MODIFIED CHEMICAL COMPOSITION AFTER NATURAL AGING, International Journal of Advanced Research (IJAR), 14 (01), 786-792, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/22608
Corresponding Author
Article Analytics
Similar Articles
This work is licensed under a Creative Commons Attribution 4.0 International License.