Vol. 4 (04) pp. 1198-1206 DOI: 10.21474/IJAR01/281

DESIGN AND FABRICATION OF MULTI-DIRECTIONAL LIFTING DUMPER.

, , , and
  • UG Scholar, Department of Mechanical Engineering, DBACER, Nagpur.
  • Assistant Professor, Department of Mechanical Engineering, DBACER, Nagpur.
102 Downloads 353 Views
Crossref

Download Full Paper (PDF)

Abstract

Normal dumper vehicle unload materials onlyin one direction that to only at the backside of the tipper by usingvarious powerfulpneumatically operated cylinder, which may cause the problems of blockage when the work area is limited. The Multidirectional dumper overcomes the problem of unloading the vehicle on side way by using Pneumatic cylinder in our prototype but pneumatic cylinder are going to be used in main vehicle . By using cylinder and chain drive the material can be unloaded in 1800 as per requirement. The Multidirectional dumper is developed and tested for its movement in all 1800 possible angle to unload the materials in the tipper trolley and monitor the inclinations for its gradualism (linearity).

Keywords

Article Analytics

How to Cite This Article

Shubham S. Ganar, Akshay D. Kakde, Rahul R.Pali, Shubham D. Kolhe and A.S Deshmukh. (2016); DESIGN AND FABRICATION OF MULTI-DIRECTIONAL LIFTING DUMPER., Int. J. of Adv. Res., 4 (04), 1198-1206, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/281

Corresponding Author

Shubham Kolhe

Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.