10Jul 2018

SUSTAINABLE LIGHTWEIGHT MATERIAL DESIGN IN PRODUCT DEVELOPMENT.

  • School of Mechanical and Building Sciences, VIT University- Chennai, Tamilnadu, India -600127.
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

The modern society characterized by a fast rise in the world population. This entails excessive consumption of all resources of the country. Land resources are limited and can be reached relatively quickly to their exhaustion. In this sense, the most important resources are related to the materials and energy. The question arises as to slow down the excessive consumption of these resources. One possible methodology is to reduce the spending of material and energy resources by using lightweight design. This article provides an overview, Sustainable and presentation strategy lightweight material as well as a systematic approach to lightweight design in product development.

  1. Ellenrieder, T. G?nsicker, M. Goede, H.G. Herrmann, Die Leichtbaustrategien, in: H.E. Friedrich (Ed.), Leichtbau in der Fahrzeugtechnik, ATZ/MTZ-Fachbuch, Springer Vieweg, Wiesbaden, 2013.
  2. Ribeiro, In?s et al. Life cycle engineering methodology applied to material selection, a fender case study. Journal of Cleaner Production. 2008, 16.17: 1887-1899. DOI: 10.1016/j.jclepro.2008.01.002
  3. Y. Ljungberg, Material selection and design for development of sustainable products, Materials and Design. 2007, 28: 466-479.DOI: 10.1016/j.matdes.2005.09.006.
  4. Sapuan, S. M. A knowledge-based system for materials selection in mechanical engineering design. Materials and Design . 2001, 22.8: 687-695. DOI:10.1016/S0261-3069(00)00108-4
  5. Kaspar, D. Baehre, M. Vielhaber, Material Selection Based on a Product and Production Engineering Integration Framework, Procedia CIRP. 2016, 50 :2-7. DOI: 10.1016/j.procir.2016.04.181
  6. Natrayan, and Senthil Kumar M. Study on Squeeze Casting of Aluminum Matrix Composites?A Review. Advanced Manufacturing and Materials Science. Springer, Cham, 2018. 75-83. DOI : 10.1007/978-3-319-76276-0_8.
  7. H.F. Zarandi, S. Mansour, S.A. Hosseinijou, M. Avazbeigi, A material selection methodology and expert system for sustainable product design, Int. J. Adv. Manuf. Technol.2011, 57 : 885-903. DOI: 10.1007/s00170-011-3362-y.
  8. S. Santhosh, R. Sasikumar, L. Natrayan, M. Senthil kumar, V. Elango and M. Vanmathi. Investigation of mechanical and electrical properties of kevlar/e-glass and basalt/e-glass reinforced hybrid composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) 2018, 8(3), 591-598
  9. Skerlos, Steven J., W. R. Morrow, and J. J. Michalek. Sustainable design engineering and science: Selected challenges and case studies. Sustainability science and engineering. Elsevier, 2006, Vol. 1: 467-515. DOI: 10.1016/S1871-2711(06)80030-9.
  10. Ljungberg, Lennart Y. Materials selection and design for development of sustainable products. Materials and Design. 2007, 28.2: 466-479. DOI: 10.1016/j.matdes.2005.09.006.
  11. L Natrayan et al. Optimization of squeeze cast process parameters on mechanical properties of Al2O3/SiC reinforced hybrid metal matrix composites using taguchi technique. Res. Express 5? (2018) 066516, DOI : 10.1088/2053-1591/aac873
  12. Giudice, F. L. R. G., G. La Rosa, and A. Risitano. Materials selection in the life-cycle design process: a method to integrate mechanical and environmental performances in optimal choice. Materials and Design. 2005, 26.1: 9-20. DOI: 10.1016/j.matdes.2004.04.006.
  13. Natrayan, Maharshi Singh and M. Senthil Kumar. An experimental investigation on mechanical behaviour of SiCp reinforced Al 6061 MMC using squeeze casting process. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) 7.6 (2017): 663-668.
  14. Ribeiro, In?s et al. Life cycle engineering methodology applied to material selection, a fender case study. Journal of Cleaner Production. 2008, 16.17 : 1887-1899. DOI: 10.1016/j.jclepro.2008.01.002.
  15. Hemanth RD., M. Senthil kumar, Ajithgopinath and Natrayan.L, Evaluation of mechanical properties of E-Glass and Coconut fiber reinforced with polyester and Epoxy resin matrices, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) 2017, 7(5), 13-20.

[L. Natrayan and M. Senthil Kumar. (2018); SUSTAINABLE LIGHTWEIGHT MATERIAL DESIGN IN PRODUCT DEVELOPMENT. Int. J. of Adv. Res. 6 (Jul). 83-92] (ISSN 2320-5407). www.journalijar.com

Natrayan.L
VIT Univeristy

DOI:

Article DOI: 10.21474/IJAR01/7339      
DOI URL: http://dx.doi.org/10.21474/IJAR01/7339

Download Full Paper

Download PDF No. of Downloads: 25 | No. of Views: 101