Vol. 5 (04) pp. 1010-1021 DOI: 10.21474/IJAR01/3909

STRUCTURE AND DESIGN OF INSTRUMENTATION CIRCULAR HOSE AS FLOW INJECTION SYNTHESIS-FIS.

  • Prog Study Teknnik Pendingin dan Tata Udara,Refrigeration and Air Condition Department, Politeknik Negeri Bandung, Ciwaruga Paronpong Bandung, Indonesia.
6 Downloads 111 Views
Crossref

Download Full Paper (PDF)

Abstract

Structure and design of the Flow Injection Synthesis-FIS were many kind, depend on the both propose and chemical process method. For chemical formation energy estimation propose isothermal tube reactor is one of simple rector, where formation energy could be estimate of the reactor dimension, flow of yield and temperature. Generally Non-Isothermal equations especially Mahadevan equation can be applied to get simply formation energy. The equations have to fractioned until be obtained both flow and temperature parameterin Non-Isothermal.

Keywords

Article Analytics

References

  1. Jasmina Khanam .,PHARMACEUTICAL ENGINEERING Crystallization., Reader of ?Pharmaceutical Engineering Division, Department of Pharmaceutical Technology, Jadavpur ?University Kolkatta-700032? (23-01-2007)
  2. Avrami, M (1939),. Kinetic of Phase Change I. General Theory., Journal of Chemical Physics 7 ??(12): 1103-1112.2
  3. Avrami, M (1940),. Kinetic of Phase Change II. Transformation-Time Relations for Relations for Distribution of Nuclei., Journal of Chemical Physics, 8 (2): 212-224.
  4. Avrami, M (1941)., Kinetic of Phase Change III. Granulation, Phase Change, and Microstructure., Journal of Chemical Physics 9 (2): 177-184
  5. Vazquez, P.L. Lopez-Alemany, P. Villares, R. Jimenez-Garay., Generalization of the Avrami equqtion for the Analysis of non-isothermal Transformation Kinetics.Application to?? ?the Crystallization of the Cu0.20AS0.30Se0.50 alloy., Departamento de Fisica de la Matera ?Condensada, Facultad de Ciencias, Facultaded de Cadiz, Apartado 40, 11510, Puerto Riel, ?Cadiz, Spain
  6. A. Hashema,1 and S. Aboulhassanb., Non-Isothermal Cystallization Kintics Of Sb10Ge10Se80 Chalcogenide Glass., aPhysics Department, Faculty of Science, Zagazig University 44519, ?Egypt. bPhysics Department, Faculty of Sciences, Benha, Egypt.1E-mail address: ??ha_hashem@zu.edu.eg?? FIZIKA A (Zagrep) 15 (2006) 4, 237-250.
  7. Zhang Zhiying ., Theoretical Analysis of Kinetics of Nonisothermal Cystallization of , Department of Textile Chemical Engineering, Tianjin Institute of Taxtile Science and ?Technology, Tianjin 300160).
  8. Guangtian Liu and Minshou Zhao., Non-isothermal Crystallization Kinetics of Cationic Viyl Monomer with Quarternay Ammonium Group Grafted Polypopelene/Polypropelene Balend., ?Institute of Environmental and Chemical Engineering, Yanshan University, Quinhuangdao- ?066004, PR China.
  9. aMingjun Yuan, aLih-sheng Tung, bDaniel F.Caulfield ., Cystallization and Thermal Behavior of Microcellular Injection-Molded Polyamide-6 Nanocomposites., aPolymer ?Engineering Centre, University of Wisconsin, Madison, Wisconsin 53706, bUSDA Forest ?Products Laboratory, Madison, Winconsin 53726.
  10. Ahmadi, H.R. Madaah Hosseini and Masoudi., Avrami Behavior of Magnetite ?Nanoparticles Formation in co-precipitation Process., Department of Materials Science and ?Engineering, Sharif University of Technology, P.O.Box 1458889694, Tehran, Iran.
  11. Erh-Chiang Chen, Tzong-Ming Wu., Nonisothermal Crystallization Kinetic and Crystalline Structure Of Nilon 6/ Funtionalized Multi-Walled Carbon Nanotube Composite., Depatment ?of Material Science and Engineering, National Cung Hsing Unversity, Taichung, Taiwan.
  12. Chen Shouxi., A Study On the Crystallization Kinetic Of Nylon, Insttute of Chemistry, Academia Sinica, Beijing, Chinese Journal Of Polymer Science, Vol 15, No 4, 1997 .
  13. Takeo Ozawa., Thermal Analiysis- Review and Prospect., Thermochimica Acta 355 (2000) 35-42. Chiba Institute of Technology, Tsudanuma? 275-8588, Japan,elsevier.com/locate/tca.
  14. Boryana D. Kolevaa, and Elisavta H. Ivanovab., Flow Injection Analysis with Atomic Spectrometric Tetction.(Review Article)., aDirectorate General, National Centre of ?Metrology, Bulgarian Institute of Metrology, G.M. Dimitrov Blvd 52 B, Sofia, Bulgaria.? ?bInstitute of General and Inorganic Chemistry, Bulgarian Academic of Sciences, Acad. G. ???Bontchev Str.Bl 11,1113 Sofia, Bulgaria

How to Cite This Article

Edie Sasito Sarwodidoyo. (2017); STRUCTURE AND DESIGN OF INSTRUMENTATION CIRCULAR HOSE AS FLOW INJECTION SYNTHESIS-FIS., Int. J. of Adv. Res., 5 (04), 1010-1021, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/3909

Corresponding Author

Edie Sasito Sarwodidoyo
Departemen Teknik Pendingin dan Tata Udara, Jurusan Refrigerasi dan Tata Udara, Politeknik Negeri Bandung, Bandung, Indonesia
Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.