Vol. 8 (02) pp. 781-791 DOI: 10.21474/IJAR01/10509

A COMPARATIVE EVALUATION OF THE IMPACT AND FLEXURAL STRENGTHS OF HIGH IMPACT ACRYLIC RESIN REINFORCED WITH SILANED ZIRCONIUM DIOXIDE AND TITANIUM DIOXIDE NANOPARTICLES AND ITS HYBRID COMBINATION - AN INVITRO STUDY

, , , , and
  • PG Student, Department of Prosthodontics, Coorg Institute of Dental Sciences.
  • Professor & Chair, Department of Prosthodontics, Coorg Institute of Dental Sciences.
  • Senior Lecturer, Department of Prosthodontics, Coorg Institute of Dental Sciences.
  • Professor & HOD, Department of Prosthodontics, Coorg Institute of Dental Sciences.
  • Senior Lecturer, Department of Prosthodontics, Coorg Institute of Dental Sciences.
  • Professor, Department of Prosthodontics, Coorg Institute of Dental Sciences.
48 Downloads 174 Views
Crossref

Download Full Paper (PDF)

Abstract

Heat cure acrylic resin is the most widely used material for the fabrication of removable dentures even today. But due to its low fatigue strength and fracture resistance, the dentures tend to flex and can also fracture. With the advancement in nanoscience, nano-sized fillers were found to exhibit improved fracture resistance. Hence in this study both ZrO2(5%) & TiO2(1%) nanoparticles and its hybrid combination (2%) were used to comparatively evaluate the impact and flexural strengths of high impact acrylic resin. A total of 45 specimens were subjected to impact strength testing in an impact tester and flexural strength testing using three point bending test in a Universal testing machine respectively. The present study shows that hybrid reinforcement can be considered a better reinforcement option for enhancing the impact and flexural strengths of acrylic resin.

Keywords

Article Analytics

References

  1. Carlsson GE, Omar R. The future of complete dentures in oral reha?bilitation. A critical review. J Oral Rehabil. 2010 Feb 1; 37(2):143-56.
  2. Nandal S, Ghalaut P, Shekhawat H, Gulati MS.New era in denture base resins: A review. J Adv Stud. 2013; 1(3):136-43.
  3. Ahmed MA, Ebrahim MI. Effect of zirconium oxide nano-fillers addition on the flexural strength, fracture toughness, and hardness of heat-polymerized acrylic resin. World J Nano Sci Eng. 2014 May 9; 4(2):50-7.
  4. Ihab NS, Hassanen KA, Ali NA. Assessment of zirconium oxide nano-fillers incorporation and silanation on impact, tensile strength and color alteration of heat polymerized acrylic resin. J Bagh Coll Dent. 2012; 24(4):36-42.
  5. Heidari B, Firouz F, Izadi A, Ahmadvand S, Radan P. Flexural strength of cold and heat cure acrylic resins reinforced with different materials. J Dent (Tehran). 2015; 12(5):316.
  6. Gad MM, Fouda SM, Al-Harbi FA, Napankangas R, Raustia A. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition. Int J Nanomedicine. 2017; 12:3801-12.
  7. Nazirkar G, Bhanushali S, Singh S, Pattanaik B, Raj N. The effect of anatase titanium dioxide nanoparticles on the flexural strength of heat cured poly methyl methacrylate resins: An In-Vitro Study. J Indian Prosthodont Soc. 2014 Dec; 14(1):144-9.
  8. Salman TA, Khalaf HA. The influence of adding of modified ZrO2-TiO2 nanoparticles on certain physical and mechanical properties of heat polymerized acrylic resin. J Bagh Coll Dent. 2015 Sep; 27(3):33-9.
  9. Harini P, Mohamed K, Padmanabhan TV. Effect of Titanium dioxide nanoparticles on the flexural strength of polymethylmethacrylate: An in vitro study. Indian J Dent Res. 2014 Jul 1; 25(4):459-63.
  10. Madfa AA, Al-Sanabani FA, Al-Qudami NH, Al-Sanabani JS, Amran AG. Use of Zirconia in Dentistry: an overview. The Open Biomater J. 2014 Jan 23; 5(1):1-9.
  11. Asopa V, Suresh S, Khandelwal M, Sharma V, Asopa SS, Kaira LS. A comparative evaluation of properties of zirconia reinforced high impact acrylic resin with that of high impact acrylic resin. Saudi J Dent Res. 2015 Jul 31; 6(2):146-51.
  12. Ayad NM, Badawi MF, Fatah AA. Effect of reinforcement of high-impact acrylic resin with zirconia on some physical and mechanical properties. Cl?n. Pesq. Odontol. 2008 Sep 4; 4(3):145-51.
  13. Ahmed MA, El-Shennawy M, Althomali YM, Omar AA. Effect of tita?nium dioxide nano particles incorporation on mechanical and physical properties on two different types of acrylic resin denture base. World J NanoSci Eng. 2016 Jul 5; 6(3):111-9.
  14. Machado AL, Puckett AD, Breeding LC, Wady AF, Vergani CE. Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins. 2012 Jun 1; 29(2):318-23.
  15. Alla R, Raghavendra KN, Vyas R, Konakanchi A. Conventional and contemporary polymers for the fabrication of denture prosthesis: part I?overview, composition and properties. Int J Appl Dent Sci. 2015; 1(4):82.
  16. Ajaj-ALKordy NM, Alsaadi MH. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins. Saudi Dent J. 2014 Jan 1; 26(1):15-8.
  17. Naji SA, Behroozibakhsh M, Hajizamani H, Habibzadeh S. Recent Advances and Future Perspectives for Reinforcement of Poly (methyl methacrylate) Denture Base Materials: A Literature Review. J Dent Biomater. 2018 Mar 4; 5(1):490-502.
  18. Elshereksi NW, Ghazali MJ, Muchtar A, Azhari CH. Perspectives for titanium-derived fillers usage on denture base composite construction: A review article. Adv Mater Sci Eng. 2014; 2014.
  19. Filipponi L, Sutherland D. Nanotechnologies: principles, applications, implications and hands-on activities: A compendium for educators. Luxembourg: Publications Office of the European Union;
  20. Ergun G, Sahin Z, Ataol AS. The effects of adding various ratios of zirconium oxide nanoparticles to poly (methyl methacrylate) on physical and mechanical properties. J Oral Sci. 2018; 60(2):304-15.
  21. Gad MM, Abualsaud R, Rahoma A, Al-Thobity AM, Al-Abidi KS, Akhtar S. Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material. Int J Nanomed. 2018; 13:283.
  22. Yu W, Wang X, Tang Q, Guo M, Zhao J. Reinforcement of denture base PMMA with ZrO2 nanotubes. J Mech Behav Biomed Mater. 2014 Apr 1; 32:192-7.
  23. Ihab NS. Evaluation the effect of modified nano-fillers addition on some properties of heat cured acrylic denture base material. J Bagh College Dentistry. 2011; 23(3):23-9.
  24. Gad MM, Abualsaud R. Behavior of PMMA Denture Base Materials Containing Titanium Dioxide Nanoparticles: A Literature Review. Int J Biomater. 2019; 2019.
  25. Alwan SA, Alameer SS. The effect of the addition of silanizedNanotitania fillers on some physical and mechanical properties of heat cured acrylic denture base materials. J Bagh College Dentistry. 2015 Mar; 325(2218):1-2.
  26. Shirkavand S, Moslehifard E. Effect of TiO2 nanoparticles on tensile strength of dental acrylic resins. J Dent Res Dent Clin Dent Prospects. 2014; 8(4):197.
  27. Narendra R, Reddy NS, Reddy SD, Purna CS, Shekar MC, Balasubramanyam S. A Comparative Evaluation of Impact Strength of Conventionally Heat Cured and High Impact Heat Cured Polymethyl Methacrylate Denture Base Resins: An in vitro Study. J Contemp Dent Pract. 2013 Nov 1; 14(6):1115.
  28. Silva CD, Machado AL, Chaves CD, Pavarina AC, Vergani CE. Effect of thermal cycling on denture base and autopolymerizing reline resins. J Appl Oral Sci. 2013 Jun; 21(3):219-24.
  29. Ghahremani L, Shirkavand S, Akbari F, Sabzikari N. Tensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles. J Clin Exp Dent. 2017 May; 9(5):661.
  30. Nejatian T, Johnson A, Van Noort R. Reinforcement of denture base resin. Adv Sci Tech. 2006; 49:124-9.

How to Cite This Article

Rebecca Lilda G., Rupesh P.L., Unni Pympallil, Basavaraj S. Salagundi, Pallavi N. T and Vachan Poonacha (2020); A COMPARATIVE EVALUATION OF THE IMPACT AND FLEXURAL STRENGTHS OF HIGH IMPACT ACRYLIC RESIN REINFORCED WITH SILANED ZIRCONIUM DIOXIDE AND TITANIUM DIOXIDE NANOPARTICLES AND ITS HYBRID COMBINATION - AN INVITRO STUDY, Int. J. of Adv. Res., 8 (02), 781-791, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/10509

Corresponding Author

Dr.Rebecca Lilda. G
PG Student, Dept. of Prosthodontics, Coorg Institute of Dental Sciences
Creative Commons Attribution 4.0 This work is licensed under a Creative Commons Attribution 4.0 International License.