INVESTIGATION OF MECHANICAL PROPERTIES OF PAVER BLOCK MADE WITH EVA POLYMERS AND FLY ASH

The aim of the project is to replace cement with fly ash and course aggregate with Ethyl Vinyl Acetate (EVA) in paver block. In this thesis paver block design is by using cement concrete mixture of mix design M30 which is composed of 10mm coarse aggregate cement and fine aggregate (M-sand).In this thesis the cement is partially replaced with fly ash and partial replacement of EVA with coarse aggregate in paver block at various level of 5, 10, 15, and 20 percentage of its weight. The paver block curing process is done for 7days and 28days. After curing it is checked for its compression strength, water absorption test and densitytest.