EXPLORING THE RELATIONSHIP BETWEEN NDT AND DT TECHNIQUES IN CONCRETE: LINEAR, QUADRATIC, AND CUBIC CORRELATION MODELS
- Research Scholar, Department of Civil Engineering, Vedica Institute of Technology, RKDF University, Bhopal, India.
- Professor, Department of Civil Engineering, Vedica Institute of Technology RKDF University Bhopal, India.
Abstract
The present study involves the development of a correlation of Non-Destructive Testing (NDT) and Destructive Testing (DT) techniques for evaluation of concrete strength. The models selected are linear, quadratic, cubic for the present study. Concretes with grades M10 to M40 were used and compressive strength relationships developed between what was obtained from the destructive testing using a compression testing machine and surface hardness measurement gotten through non-destructive testing using a rebound hammer. The analysis showed good correlations, where the coefficients of determination (R) ranged from 91.6% to 97.9% for the different models. This can be used to prove that the NDT, when calibrated on DT data, allows for accurate estimation of concrete strength with very low intrusion and time investment. The study highlights how advanced mathematical models can facilitate more accurate predictions for concrete strength which may decisively determine the safety and durability of larger engineering works.
Keywords
Article Analytics
How to Cite This Article
Priyesh Gangele and Arun Kumar Patel (2025); EXPLORING THE RELATIONSHIP BETWEEN NDT AND DT TECHNIQUES IN CONCRETE: LINEAR, QUADRATIC, AND CUBIC CORRELATION MODELS, Int. J. of Adv. Res., 13 (06), 115-132, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/21070
Corresponding Author
This work is licensed under a Creative Commons Attribution 4.0 International License.