SEM ANALYSIS OF NONMETALLIC INCLUSION OF THE STAINLESS STEEL MODIFIED WITH ADDITION OF Zr AND Te.

Sc. Dervis Mujagic; Sc. Aida Imamovic; Sc. Mirsada Oruc.

doi:10.21474/IJAR01/9195

01 Jun 2019 Vol. 7 (06) pp. 63-69 DOI: 10.21474/IJAR01/9195

SEM ANALYSIS OF NONMETALLIC INCLUSION OF THE STAINLESS STEEL MODIFIED WITH ADDITION OF Zr AND Te.

Sc. Dervis Mujagic, Sc. Aida Imamovic and Sc. Mirsada Oruc.

University of Zenica,Institute "Kemal Kapetanovic
University of Zenica, Faculty of Metallurgy and Technology.

28 Downloads 111 Views

Download Full Paper (PDF)

Abstract

Control of the formation of nonmetallic inclusions and their characterization is the foundation for improving the qualities of steel products, as well as designing new types of steel. In order to produce steel with improved machinability, such as austenitic stainless steel X8CrNiS18-9, is made modification of the chemical composition of nonmetallic inclusions. In this paper, Thermo-Calc phase calculation and SEM studies of the presence and type of inclusions in austenitic stainless steel with the addition of sulphur of the label X8CrNiS18-9 with and without addition of alloying elements Zr and Te, were carried out individually in order to investigate their influence on the shape and chemical composition of the inclusions.

Keywords

How to Cite This Article

Sc. Dervis Mujagic, Sc. Aida Imamovic And Sc. Mirsada Oruc. (2019); SEM ANALYSIS OF NONMETALLIC INCLUSION OF THE STAINLESS STEEL MODIFIED WITH ADDITION OF Zr AND Te., International Journal of Advanced Research (IJAR), 7 (06), 63-69, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/9195

Corresponding Author

Derviš Mujagi?
University of Zenica, Institute "Kemal Kapetanovi?"

Article Analytics

References

Mujagić, A. Imamović, M. Oruč, S.Muhamedagić: Analysis of the type and chemical content of the inclusion on sem of the stainless steel with and without the addition of Zr and Te: 4th International Conference ?NEW TECHNOLOGIES? NT-2018? Development and Application, Sarajevo, 14-16. June 2018, 72-79.
Grum: Quantitative analysis of sulphide inclusions in free cutting steels and their influence on machinability, Acta Stereol, Ljubljana, (1999), Vol. 18, No. 3, pp. 319-331
Shibata, T. Tanaka, K. Kimura, S.-Y. Kitamura: Composition change in oxide inclusions of stainless steel by heat treatment, Ironmaking and Steelmaking Vol. 37 No. 7, (2010)
R. Davis: Alloying Understanding The Basics, ASM International, Materials Park, Ohio, USA, 2001; pp, 255-259.
Senk:Steel metallurgy - challenged by materials, Stahl und Eisen 134 (2014) No. 11, pp. 110-121;
Mahmutović, A. Nagode, M. Rimac, D. Mujagić: Modification of inclusions in austenitic stainless steel by adding tellurium and zirconium, Materials and Technology 3, ISSN:1580-2949, MTAE9, 51 (3), 2017. 523-528.
Oruč, R. Sunulahpa?ić - "Contemporary metal materials" ? University of Zenica, Faculty of Metallurgy and Technology, Zenica, 2005
D. Mujagić: "Contribution to research of influence microalloying with boron, zirconium and tellurium on properties of austenitic stainless steel with sulphur addition X8CrNiS18-9", PhD thesis, University of Zenica, Faculty of Metallurgy and Technology, Zenica, January 2017