SYNTHESIS AND CHARACTERIZATION OF FESE SUPERCONDUCTORS BY THE ADDITION OF MG DOPING USING THE VACUUM METHOD
- Departement of Physics, University Of Sumatera Utara, Medan, Indonesia.
- Research Center for Materials and Mettalurgy, Indonesian Institute Of Science (LIPI), Gd 470 Kawasan Puspitek, Serpong, Tangerang Banten 15314, Indonesia.
Abstract
In this work, the powder preparation Fe0.99Se-Mg 1wt%. Iron, selenium powder, and magnesium powder are used as raw materials. The raw materials is milled using a mortar agate for 3 hours after weighed in the ratio of the atom Mg:Fe;Se = 0.01:0.99:1. To be characterized by the formation of Fe0.99Se-Mg 1wt%, the milled powder is then compressed into a pellet sample and sintered at 745˚C and 845˚C for 3 hours. All sample are sintered on furnance and cooled with room temperature. XRD are used to analyse forming phase. Based on the calculation of diffraction pattern, sample are sintered at 745˚C has a higher mass fraction of tetragonal phase than a sample that is sintered at 845˚C. the lattice parameter at 745˚C sample are a = 3.7790 Å and c = 5.5111 Å. According to the resistivity measurement results, it appears that the sample are sintered at 745˚C have a critical temperature ~ 13.4K.
Keywords
Article Analytics
How to Cite This Article
Dea Nita Deslia Sari, Kerista Tarigan, Agung Imaduddin, Sigit Dwi Yudanto and Dan Heri Nugraha (2020); SYNTHESIS AND CHARACTERIZATION OF FESE SUPERCONDUCTORS BY THE ADDITION OF MG DOPING USING THE VACUUM METHOD, Int. J. of Adv. Res., 8 (07), 1824-1828, ISSN 2320-5407. DOI: https://doi.org/10.21474/IJAR01/11450
Corresponding Author
This work is licensed under a Creative Commons Attribution 4.0 International License.